Anglais
Le portugais
espagnol
Le malais
Indonésien
Allemand
Le turc
Le vietnamien
FrançaisCurrent
russe
Arabe
Thaïlandais
Japonais
Coréen
Meubles de salle blanche et produits en acier inoxydable
Cabinet de stérilisation de vêtements Cleanroom
An enclosed Type 304L stainless cabinet with shielded UV-C lamps, separate hanging and footwear zones, an adjustable timer and door-activated lamp interlock.
- Shielded 253.7 nm UV-C lamps
- Door-activated lamp safety interlock
- Separate garment and footwear zones
- Adjustable cycle timer and status lights
Introduction de produit
The cleanroom garment sterilizing cabinet encloses hanging apparel and footwear inside an opaque Type 304L stainless chamber during a timed UV-C exposure cycle. Two guarded 253.7 nm lamp assemblies are positioned beside the hanging zone, while a perforated divider separates the lower footwear compartment without blocking reflected light. A door safety switch disconnects the lamps as either door opens. The flush blue control panel provides timer setting, cycle start, lamp status and an amber in-process indicator without placing exposed controls inside the treatment chamber. The cabinet interior uses polished stainless reflectors, a removable perforated shoe tray and a full-width hanger rail.
Key Features
A hardwired door switch interrupts lamp power before an operator can access the treatment chamber.
The perforated lower divider keeps footwear separate while allowing light to reach the removable shoe tray.
The exterior timer, cycle switch and colored status indicators give operators a clear control point outside the opaque enclosure.
Des solutions pour votre application
UV-C garment treatment needs an enclosed, interlocked chamber that organizes clothing while controlling operator exposure and shadowed surfaces.
A single unguarded lamp leaves garment folds shadowed and exposes fragile tubes to contact.Opposed guarded lamp assemblies illuminate the hanging zone from both sides while protecting the tubes.
Opening a treatment cabinet during a running cycle can expose the operator to active UV-C light.A positive-action door safety switch removes lamp power as soon as either door releases.
Footwear placed beneath hanging garments blocks light and transfers residue to longer apparel.A perforated stainless divider creates a separate removable footwear tray below the hanging rail.
Operators cannot distinguish ready, active and interrupted cycles on cabinets with one unlabeled switch.Separate green ready, amber cycle and red fault indicators communicate operating state beside the digital timer.
Les applications typiques
Reusable cleanroom garment treatmentPharmaceutical gowning supportMedical and laboratory coat sanitationFood-production protective clothing roomsClean footwear and accessory treatment
Paramètres techniques
Typical configurable specifications for an enclosed UV-C cleanroom garment sterilizing cabinet are listed below.
| Matériaux de base | Type 304L stainless steel double-skin enclosure with two guarded 253.7 nm UV-C lamps, hanger rail and removable perforated footwear tray |
|---|---|
| Panneau épaisseur | 1.2–1.5 mm inner and outer stainless enclosure panels |
| Largeur effective | 900–1100 mm overall cabinet width |
| Longueur maximale | 2100 mm maximum cabinet height including status beacon |
| Acier face épaisseur | 1.2–1.5 mm Type 304L stainless inner chamber, doors and outer body |
| Densité Core | 7900-8000 kg/m³ pour Type 304L acier inoxydable |
| Conductivité thermique | 14-16 W/(m · K) pour Type 304L acier inoxydable |
| surface finie | Brushed exterior stainless with reflective polished interior, blue silicone door seals and blue flush control panel |
| Type joint | Continuously welded double-skin chamber with opaque gasketed doors, concealed hinges, compression latch and hardwired door interlock |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
0–60 minute digital or rotary cycle timerAdditional guarded lamp assembliesTop-mounted filtered-air circulation moduleType 316L electropolished treatment chamber
Planning a Cleanroom Garment Sterilizing Cabinet specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
