Anglais
Le portugais
espagnol
Le malais
Indonésien
Allemand
Le turc
Le vietnamien
FrançaisCurrent
russe
Arabe
Thaïlandais
Japonais
Coréen
Accessoires d'installation Cleanroom
Ancre chimique
A two-component injection resin system that bonds threaded rods into drilled concrete or masonry holes for cleanroom support fixings.
- Two-Part Resin
- Static Mixing Nozzle
- Stress-Distributed Bond
- Flexible Embedment Depth
Introduction de produit
The chemical anchor uses a dual-chamber cartridge to keep resin and hardener separate until extrusion through a static mixer. The blended compound fills the cleaned drilled hole and bonds around a zinc-plated or stainless threaded rod, transferring load through the embedment without an expansion wedge. This makes it useful for cleanroom ceiling hangers, frames and service supports where edge distance, substrate condition or fixing layout favors a bonded connection.
Key Features
Bonded anchorage transfers force along the embedment rather than creating concentrated expansion pressure.
Threaded-rod diameter and embedment can be selected for the substrate and support detail.
Cartridge dispensing allows controlled filling of horizontal, vertical or overhead drilled holes with the appropriate formulation.
Des solutions pour votre application
Cleanroom support hardware often needs a durable threaded fixing where expansion force, irregular holes or limited edge distance complicate mechanical anchoring.
Expansion anchors can introduce high radial stress near a concrete edge.Bonded resin develops adhesion along the embedment without relying on a driven expansion wedge.
Dust left in the drilled hole weakens adhesive contact.Specified blow-brush-blow cleaning prepares the hole before controlled resin injection.
Unmixed resin creates soft zones around the threaded rod.The static mixer combines both cartridge components; the initial discharge is discarded until the color is uniform.
Incorrect embedment wastes resin or reduces anchorage capacity.Hole diameter, depth, rod size and resin volume are matched to the fixing design and substrate.
Les applications typiques
Cleanroom ceiling hanger anchorsWall-frame support fixingsService support channelsEquipment restraint bracketsConcrete and solid-masonry anchorage
Paramètres techniques
Typical component and installation ranges for a two-part injection chemical anchor system are listed below.
| Matériaux de base | Two-component vinylester, epoxy-acrylate or epoxy anchoring resin with threaded steel rod |
|---|---|
| Panneau épaisseur | 40-150 mm compatible cleanroom panel or support-zone thickness |
| Largeur effective | 8-30 mm typical drilled-hole diameter |
| Longueur maximale | Up to 1000 mm threaded anchor-rod length |
| Acier face épaisseur | 1.50-8.00 mm compatible support-bracket thickness |
| Densité Core | Approximately 1400-1800 kg/m³ mixed resin density |
| Conductivité thermique | Approximately 0.20-0.40 W/(m·K) for cured anchoring resin |
| surface finie | White/red dual-chamber cartridge; zinc-plated or passivated stainless threaded hardware |
| Type joint | Resin-bonded threaded-rod embedment in cleaned drilled concrete or masonry |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Vinylester or epoxy resin chemistryZinc-plated or stainless threaded rodMultiple cartridge volumesStandard or extended static mixer
Planning a Chemical Anchor specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
