STjh eight-row five-eighth-inch chilled-water cooling coil with an extended deep finned block on white.

STJH-CHILLED-WATER-COOLING-COIL-8ROW-58IN

Chilled-Water Cooling Coil Eight-Row 5/8-Inch

The deepest selected water coil for high-latent make-up air and low leaving-temperature duty.

Eight-row deep core
6-72 in fin-height range
High-latent cooling duty

Bitte senden Sie eine Anfrage. Browse Produkte

Produkteinführung

The eight-row core provides the longest air path and largest surface area in this chilled-water group. The referenced construction spans fin heights from 6-72 in and lengths from 12-240 in, allowing large custom faces for low-temperature supply air. Its added latent capacity suits high outdoor-air fractions, but the designer must account for greater wet pressure drop, condensate volume and cleaning access.

Key Features

Maximum heat-transfer depth

Eight rows support lower leaving temperatures and greater moisture removal than the shallower models.

Wide custom face range

Published height and length ranges support both compact and very large AHU sections.

Make-up-air capability

The deep surface is appropriate for high outdoor-air latent loads and low dew-point supply.

Technische Parameter

Tube Rows	8
Tube Outside Diameter	5/8 in
Fin Height Range	6-72 in
Fin Length Range	12-240 in
Tube Material	Copper by standard duty
Fin Material	Aluminum by standard duty
Fluid	Chilled water
Casing	Selected for wet AHU environment
Primary Duty	High-latent and low-temperature supply air
Customisierung	Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung.

Applications

For high-outdoor-air cleanroom make-up units, low-dew-point supply systems and precision spaces with demanding latent loads.

Solutions for Your Application

The deep coil and dense fins exceed the supply fan's available static pressure.Rate wet and dry resistance at actual face velocity and enlarge the face or reduce fin density where needed.

Condensate remains inside the eight-row core after shutdown.Provide full-depth drainage, correct coil pitch and access for cleaning the entering and leaving faces.

Verfügbare Optionen

Specify face size, leaving conditions, water temperatures, fin spacing, tube wall, circuiting, coating, casing and moisture eliminator.

Planning a Chilled-Water Cooling Coil Eight-Row 5/8-Inch specification?

Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.

Sprechen Sie mit unserem Team