Englisch
Portugiesisch
Spanisch
Malaiisch
indonesisch
DeutschCurrent
Türkischer Sprache
Vietnamesisch
Französisch
Russisch
Arabisch
Thailändisch
Japanisch
Koreanisch
Cleanroom Installation Zubehör
Epoxy-Reparatur - Verbindung
A two-component resin-and-hardener repair compound for rebuilding small damaged areas before sanding and hygienic surface finishing.
- Metered Two-Part Mixing
- Low-Shrink Hard Cure
- Sandable Repair Surface
- Multi-Substrate Bonding
Produkteinführung
Epoxy repair compound combines resin and hardener at a controlled ratio to form a dense thermoset repair material. Dual-cartridge packaging meters both components through a static mixer, reducing incomplete blending on small maintenance jobs. The mixed compound wets properly prepared metal, concrete and rigid panel surfaces, fills chips or localized voids and cures to a hard profile that can be shaped, sanded and overcoated with a compatible hygienic finish.
Key Features
The static mixer produces a uniform blend without a separate mixing cup.
Low curing shrinkage helps the patch retain contact with sound repair edges.
The hardened surface can be machined or sanded before compatible topcoat application.
Lösungen für Ihre Anwendung
A localized cleanroom repair must bond to a carefully prepared substrate and finish flush without leaving a porous or dirt-catching patch.
Hand-proportioned resin and hardener can remain soft when the ratio is inaccurate.Matched dual cartridges meter both components before they enter the static mixing element.
Oil, dust or weak coating prevents a repair from anchoring to the base material.The defect is cut back to sound material, degreased and mechanically keyed before application.
A proud or rough patch creates a ledge that is difficult to clean.The cured compound is shaped and sanded flush, then closed with a compatible smooth finish.
Large deep fills can overheat or cure unevenly during the exothermic reaction.Repair depth and batch size are limited to the selected grade, with deeper voids rebuilt in controlled stages.
Typische Anwendungen
Cleanroom panel chip repairLocalized coated-metal defect fillingConcrete floor edge restorationEquipment base and curb repairsRigid frame and trim rebuilding
Technische Parameter
Typical construction and application ranges for a cartridge-dispensed two-component epoxy repair compound are listed below.
| Core Material | Two-component epoxy resin and amine hardener with mineral reinforcement |
|---|---|
| Panel Dicke | 1-25 mm practical repair layer thickness |
| Effektive Breite | 5-100 mm typical localized repair width |
| Maximale Länge | Up to 1000 mm continuous localized repair strip per application |
| Stahl facing Dicke | 0.50-2.00 mm compatible steel repair substrate thickness |
| Kerndichte | Approximately 1400-2000 kg/m³ mixed compound density |
| Thermische Leitfähigkeit | Approximately 0.30-0.80 W/(m·K) for cured filled epoxy |
| Oberfläche Finish | Dense sandable gray or off-white surface suitable for compatible overcoating |
| Gemeinsamer Typ | Bonded chip, crack, edge or shallow-void repair on sound prepared substrate |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Dual cartridge or hand-mix packFast or extended working timeGray or off-white compoundStatic mixer and application spatula kit
Planning a Epoxy Repair Compound specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
