STjh standard split butterfly valve with mechanical docking halves

STJH-SPLIT-BUTTERFLY-VALVE-1UG

Split Butterfly Valve Standard High-Containment

A mechanical split-disc valve for routine potent-powder transfer at the standard manufacturer-listed containment tier.

Down to 1 µg/m³ listed tier
No extraction utility required
Interlocked split-disc docking

مقدمة المنتج

This base configuration uses the interlocked active and passive valve halves without additional vacuum or interface extraction. It is intended for transfers whose risk assessment aligns with the manufacturer-listed down-to-1 µg/m³ tier, avoiding the added utility and cleaning demands of the extract-assisted versions.

الخصائص الرئيسية

Utility-light containment

The standard interface works without a separate vacuum or extraction connection.

Protected mating faces

The two disc halves join before opening so exposed interfaces are enclosed during product flow.

Process-wide media handling

The valve principle suits powders, granules and selected semi-solid transfers across several production steps.

المعلمات الفنية

Containment Tier	Manufacturer-listed down to 1 µg/m³ in the applicable tested configuration
Valve Principle	Split butterfly disc
Product-Contact Material	316L stainless steel
Valve Halves	Interlocked active and passive units
Operation	Manual or pneumatic
Extraction	Not required for the standard tier
Transfer Media	Powders, granules and selected semi-solids
Typical Processes	Dispensing, charging, sampling, blending and filling
Interface State	Mating faces enclosed when the assembled disc opens
التخصيص	Nominal size, actuator, seals, vessel connection and cleaning arrangement can be selected for the intended powder and containment target.

Applications

Routine contained API dispensing, vessel charging, blend transfer, sampling and oral-solid production where the standard listed containment tier is appropriate.

Solutions for Your Application

The process needs containment but has no convenient extraction utility at the docking point.Use the standard mechanical tier when the documented exposure assessment supports operation without interface extraction.

Passive containers must not open unless fully connected to the process valve.Use the active-passive interlock so the combined disc opens only after correct docking.

الخيارات المتاحة

Manual or pneumatic actuation, valve diameter, elastomer selection, flexible or rigid container connection, wash arrangement and vessel adapter may be configured.

Planning a Split Butterfly Valve Standard High-Containment specification?

أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.

تحدث مع فريقنا