English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
Resilient support layer
The rubber pad provides the cushioning mechanism and helps reduce footfall transmission through the floor construction.
STJH-POLYURETHANE-SELF-LEVELING-FLOORING-AP80
Polyurethane Self-Leveling Flooring Acoustic-Pad
A pad-supported resin floor for occupied clean areas where footfall sound and underfoot cushioning are key concerns.
- Bonded nominal 5 mm rubber pad
- Pore-filled support below polyurethane
- Approximately 8 mm complete assembly
About This Product
AP80 adds a bonded rubber shock pad beneath the polyurethane wearing system. Adhesive fixes the pad to the base, pore filler closes its open surface, and a pigmented polyurethane body and topcoat form the cleanable face. The approximately 8 mm construction is substantially deeper than directly bonded comfort coatings. Its layered edge reveals the resilient support that distinguishes this model.
الخصائص الرئيسية
Closed pad interface
Pore filling creates a suitable receiving surface so the liquid body coat does not simply drain into the porous underlay.
Seamless exposed face
The upper resin layers provide a continuous cleanable surface while the cushioning material remains enclosed below.
المعلمات الفنية
| Support Layer | Bonded recycled-rubber shock pad |
|---|---|
| Nominal Pad Thickness | 5 mm |
| Overall Build | Approximately 8 mm |
| Bonding Layer | Polyurethane adhesive |
| Intermediate Layer | Compatible pore filler |
| Wearing Body | Self-leveling polyurethane |
| Topcoat | Water-based polyurethane |
| إنهاء السطح | Smooth matte |
| Primary Function | Footfall damping and underfoot cushioning |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
Applications
Suitable for quiet laboratory observation areas, healthcare corridors and clean personnel rooms with prolonged occupancy. Evaluate wheel loads and stationary furniture feet carefully: a cushioned floor needs different loading consideration from a rigid epoxy screed. Door clearances must accommodate the deeper assembly.
Solutions for Your Application
A direct-bonded resin floor does little to soften footfall.
Include the bonded pad and pore-filler stages beneath the polyurethane wearing layers.
The added thickness conflicts with an existing doorway.
Plan a supported transition and check clearance against the complete assembly before installation.
الخيارات المتاحة
Specify colour, cove treatment and adjoining-floor transitions. Use the nominal 5 mm pad construction consistently; changing pad thickness also changes the system height and underfoot response.
Planning a Polyurethane Self-Leveling Flooring Acoustic-Pad specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
