English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
Airflow and structure selected together
The perforation pattern determines the open route through the panel, while the supporting steel geometry determines how equipment loads reach the floor understructure.
STJH-PERFORATED-STEEL-RAISED-ACCESS-FLOOR-AF38
Perforated Steel Raised Access Floor 38% Open-Area Heavy-Duty Ventilation
A reinforced steel ventilation panel family for balancing higher airflow with technical equipment loading.
- Up to 38% free cross-section
- Welded tubular steel structure
- Selectable reinforcement and flow regulation
About This Product
The AF38 configuration uses a powder-coated welded tubular steel body with a selected ventilation pattern providing up to 38% free cross-section. Panel thickness ranges from 30 to 38 mm within the reference family. Its purpose is to pair airflow geometry with an appropriate support and reinforcement selection, rather than treating every perforated steel panel as structurally interchangeable.
الخصائص الرئيسية
Optional volume regulation
An underside regulating arrangement can tune local airflow. Keep it accessible for commissioning and later adjustments when equipment density or operating heat output changes.
Load-specific variants
Standard and reinforced constructions serve different duties. Select the appropriate variant from the actual point loads instead of applying the highest family rating to every panel.
المعلمات الفنية
| Panel Grid | 600 x 600 mm |
|---|---|
| Thickness Range | 30–38 mm |
| Structure | Welded tubular steel |
| Surface Protection | Powder coating |
| Free Cross-Section | Up to 38% |
| Standard Point-Load Selection | 3–5 kN, depending on construction |
| Reinforcement | Higher-load variants available |
| Flow Regulation | Optional underside adjustment |
| Support | Matched pedestal and support system |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
Applications
Suitable for technical plant rooms, server suites and controlled equipment areas requiring ventilation through a raised floor. Define the actual loads and available air pressure together. Published airflow ranges describe different configurations and operating conditions; they should not be treated as a fixed output from an unpowered floor panel.
Solutions for Your Application
A high-open panel is selected without considering concentrated equipment feet.
Choose the necessary reinforcement and support arrangement alongside the ventilation pattern for each loaded location.
A changed rack layout receives too much or too little air.
Adjust the regulating arrangement and check the pressure and obstruction conditions beneath the panel after equipment changes.
الخيارات المتاحة
Choose perforation pattern, supported load variant and suitable surface covering. Specify flow regulation where local adjustment is useful, and preserve access to the underside device without disturbing permanent equipment supports.
Planning a Perforated Steel Raised Access Floor 38% Open-Area Heavy-Duty Ventilation specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
