STjh medium 600 mm active material airlock with enlarged H14 blower, ceiling diffuser and return-air duct

STJH-MATERIAL-AIRLOCK-600-ACTIVE

Active Cleanroom Material Airlock 600 mm

A mid-size autonomous material lock for component bins and routine batch transfers between classified rooms.

600 mm cubic transfer chamber
800 x 675 x 1100 mm body
Self-contained H14 filtered airflow

مقدمة المنتج

This 600 mm cubic configuration enlarges usable capacity for routine component bins while retaining a manageable 800 x 675 x 1100 mm external envelope. An integral fan draws air through an H14 HEPA filter and supplies vertical low-turbulence displacement flow. The unit therefore operates independently of the central ventilation system and controls doors so only one side is open at a time.

الخصائص الرئيسية

Routine bin capacity

The 600 mm interior accepts medium component bins that exceed the compact model without requiring the 800 mm enclosure.

Autonomous ventilation

The onboard blower and H14 filter provide an active air path independent of room duct connections.

Controlled material sequence

Interlocked doors separate loading, airflow treatment and clean-side retrieval steps.

المعلمات الفنية

Internal Dimensions	600 W x 600 D x 600 H mm
External Dimensions	800 W x 675 D x 1100 H mm
Housing Material	V2A stainless steel 1.4301
Final Filter	H14 HEPA
Airflow	Vertical low-turbulence displacement flow
Blower	Integral autonomous fan
Door Control	Interlocked sequential opening
Installation	Wall-integrated base and installation frame
Typical Load	Medium component bins and prepared batches
التخصيص	متوفر على أساس التطبيق المقصود وبيئة التشغيل.

Applications

For prepared material batches, medium parts bins and wrapped tools passing between adjacent controlled manufacturing rooms. Validate the chamber cycle against the actual load obstruction and neighboring room pressure behavior.

Solutions for Your Application

The 500 mm chamber does not provide enough clearance around a standard component bin.Use the 600 mm cube and preserve space around the load for vertical airflow.

Connecting a transfer hatch to central ventilation would complicate balancing.Select the self-contained blower arrangement and commission it as an independent chamber.

الخيارات المتاحة

Configure corner doors, trolley base, horizontal flow, wall console, emergency stop and control indicators. Individual dimensions are available where the 600 mm standard envelope is close but not exact.

Planning a Active Cleanroom Material Airlock 600 mm specification?

أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.

تحدث مع فريقنا