STjh 610 mm U16 gel-seal ULPA filter main product view

STJH-GEL-SEAL-ULPA-U16-610

Gel-Seal ULPA Filter 610 mm U16 ePTFE

A full-size U16 boron-free membrane panel with a reverse gel channel for advanced fab ceiling systems.

U16 ePTFE membrane
35 mm pack depth
Reverse gel-seal frame

مقدمة المنتج

The U16 610 mm panel combines a 35 mm supported ePTFE pack with a reverse gel-seal aluminum frame. It is the middle efficiency choice in the full-module gel family, offering lower penetration than U15 without applying the maximum U17 resistance. The reverse trough orientation must match the ceiling grid, and the boron-free medium should be protected as part of the site's elemental-contamination strategy.

الخصائص الرئيسية

Boron-free full module

Supported ePTFE media provides full ceiling coverage without introducing glass-fiber media into the filter pack.

Reverse gel geometry

The trough position is designed for ceiling systems whose mating blade approaches the selected face of the panel.

Balanced ULPA grade

U16 offers a practical intermediate step between lower-pressure U15 and highest-efficiency U17 operation.

المعلمات الفنية

Nominal Face Size	About 610 x 610 mm
Efficiency Class	U16
Minimum Efficiency	99.99995% at MPPS
Filter Media	Boron-free supported ePTFE
Media Pack Depth	35 mm
Frame Material	Anodized aluminum
Seal Type	Reverse gel channel
Nominal Initial Resistance	0.40 in. w.g. at 100 fpm
Mating Interface	Ceiling-grid knife edge
التخصيص	متوفر على أساس التطبيق المقصود وبيئة التشغيل.

Applications

Selected for advanced wafer fabrication, lithography support and precision optics ceilings that require U16 efficiency and a reverse gel interface. Installed airflow should be checked at the operating face velocity after the panel is seated and leak-tested.

Solutions for Your Application

The filter's reverse gel channel is incompatible with the existing bottom-load grid.Record the blade approach direction and trough offset from the approved ceiling detail before placing the order.

The U16 upgrade reduces unidirectional-flow velocity below the qualified range.Use the 0.40 in. w.g. reference at 100 fpm in fan calculations and rebalance the ceiling after replacement.

الخيارات المتاحة

Define exact face and frame depth, reverse-gel side, gel chemistry, faceguards, center divider and any test-port requirement.

Planning a Gel-Seal ULPA Filter 610 mm U16 ePTFE specification?

أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.

تحدث مع فريقنا