STJH-FILTER-CLAMP-ASSEMBLY-SNAP610

Equal-Pressure Filter Clamping Assembly 610 mm Snap-Tab

A quick-service tab set for evenly clamping a full-size header filter into a modular holding frame.

Replaceable snap tabs
592 mm full-size filter
0.75 in sealing flange

مقدمة المنتج

This clamping assembly uses replaceable snap tabs around a 610 mm-class frame to press a 592 x 592 mm header filter against a three-quarter-inch sealing flange. Each tab can be serviced independently, avoiding the long linkage used by a crank housing. The simple mechanism is intended for accessible built-up AHU banks where rapid filter replacement and even perimeter contact are more important than contained change-out.

الخصائص الرئيسية

Fast manual engagement

Tabs snap into the loaded position without a separate row crank or threaded clamp.

Distributed perimeter pressure

Multiple retaining points hold the filter header against the gasket around the full face.

Individual component replacement

A damaged tab can be changed without removing the complete frame from the bank.

المعلمات الفنية

Frame Class	610 x 610 mm
Compatible Filter	592 x 592 mm header filter
Mechanism	Replaceable snap compression tabs
Sealing Flange	0.75 in
Tab Material	Corrosion-resistant metal
Seal Method	Header compressed against frame gasket
Service	Front-access manual release
Bank Type	Built-up modular AHU wall
Containment Function	Not a BIBO mechanism
التخصيص	متوفر على أساس التطبيق المقصود وبيئة التشغيل.

Applications

For accessible built-up AHU filter walls in commercial, healthcare and clean-process ventilation systems using full-size header filters.

Solutions for Your Application

Some tabs are left disengaged and the header leaks at one edge.Use a defined engagement sequence and visually confirm every tab position after the filter is seated.

Repeated changes bend a tab and reduce local clamping pressure.Inspect tab spring condition during each service and replace individual worn pieces before installing the new filter.

الخيارات المتاحة

Confirm frame profile, filter header thickness, gasket material, tab count, access direction, corrosion finish and spare-tab quantity.

Planning a Equal-Pressure Filter Clamping Assembly 610 mm Snap-Tab specification?

أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.

تحدث مع فريقنا