English
البرتغالية
الإسبانية
اللغة الملاوية
الإندونيسية
الألمانية
اللغة التركية
اللغة الفيتنامية
الفرنسية
الروسية
العربيةالحالي
التايلاندية
اليابانية
الكورية
معدات إزالة التلوث للموظفين والمواد
Floor-دائم غرفة نظيفة تمرير مربع
A floor-supported material-transfer cabinet for bulky containers and compatible carts that do not suit a small wall-mounted hatch.
- Floor-Supported Cabinet
- Low Threshold Options
- Interlocked Large Doors
- Selectable Transfer Surface
مقدمة المنتج
The floor-standing cleanroom pass box brings a larger transfer opening down to a practical loading level. Its cabinet is supported from the floor at the partition rather than relying only on a wall opening. A stainless-steel interior and opposing access doors form the enclosure for bins, equipment and suitable wheeled carriers. The threshold and internal handling surface are selected together, because a cart route and a container-conveyor route have different requirements.
الخصائص الرئيسية
A low-level opening reduces lifting when the handling route is matched to the load.
Viewing panels help staff check whether a bulky item clears the receiving side.
Door interlocking supports transfer without routinely opening both sides together.
A smooth deck offers a cleanable surface for containers or suitable cart wheels.
حلول للتطبيق الخاص بك
Bulky material transfer depends on the approach, threshold and receiving space as much as on the cabinet itself.
A container fits inside the chamber but not through the door.Use the narrowest clear opening and the complete load envelope when selecting the passage.
Small cart wheels catch at the transfer sill.Match the threshold or access ramp to the wheel size and available approach distance.
Cart wheels apply concentrated loads to the deck.Select the floor construction from the loaded cart's wheel positions and contact loads rather than its overall footprint alone.
Flat-bottomed bins are difficult to slide through a deep cabinet.An optional roller conveyor can support compatible bins directly, while carts retain a separate solid wheel path.
تطبيقات نموذجية
Cleanroom supply carts carrying packaged materialsLarge consumable bins entering medical-device assemblyBulky laboratory equipment moving between controlled roomsFlat-bottomed production totes on a selected conveyor insert
المعلمات الفنية
These common-reference choices describe a floor-standing transfer cabinet, not a tested STjh load-rated model. The chamber dimensions are a selectable starting size; cart access also depends on the clear door opening, threshold and loaded cart envelope.
| Cabinet Material | 304 stainless steel; 316 stainless steel optional |
|---|---|
| Reference Chamber Size (W × D × H) | 1000 × 1000 × 1000 mm |
| ترتيب الدعم | Floor-supported cabinet at a partition opening |
| تخطيط الباب | Two opposing hinged doors |
| قفل باب | Mechanical interlocking; electronic interlocking optional |
| Viewing Panels | زجاج مقسى |
| Transfer Surface | Solid stainless-steel deck with optional low-profile access ramps |
| Air-Handling Configuration | Static chamber; fan-assisted HEPA filtration optional |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
The basic reference arrangement is a stainless-steel floor-supported cabinet with interlocked doors and a solid transfer deck. Optional choices include low-profile access ramps, a roller conveyor for suitable flat-bottomed containers, electronic door control, 316 stainless steel and an active HEPA-filtered air circuit. A conveyor surface and a trolley wheel path are separate configurations, not interchangeable upgrades.
Selection and Installation
Size the passage around the loaded cart, including handles, projecting containers and the operator's approach. Check the smallest clear width and height along the complete route, not just the chamber dimensions. Both doors need enough space to open without obstructing adjacent traffic.
Choose a continuous wheel path with a suitable sill or ramp for cart transfer. A roller conveyor is a different handling surface: it supports compatible containers directly and is not a substitute for a deck that carries trolley wheels. Record the loaded mass, wheel arrangement and contact loads before selecting the base and floor deck; no load rating is assumed here.
Position the floor supports on a suitable finished base and seal the cabinet-to-partition junction without blocking door movement or cleaning access. If the transfer point must connect three rooms rather than two, see the three-door cleanroom pass box.
Planning a Floor-Standing Cleanroom Pass Box specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
