English
البرتغالية
الإسبانية
اللغة الملاوية
الإندونيسية
الألمانية
اللغة التركية
اللغة الفيتنامية
الفرنسية
الروسية
العربيةالحالي
التايلاندية
اليابانية
الكورية
أدوات اختبار الغرفة النظيفة والتحقق من صحتها
Airflow التصور ضباب
A compact handheld fog applicator delivering a controlled visible tracer for localized cleanroom airflow visualization and documented smoke studies.
- Precise handheld tracer placement.
- Gentle trigger-controlled fog pulses.
- Compact wipe-clean study instrument.
مقدمة المنتج
This portable fogger places a fine, visible aerosol precisely at filter faces, transfer openings and equipment boundaries where a larger generator is cumbersome. Its pistol-style body integrates a small fluid cartridge, low-momentum delivery path and simple trigger control. The operator can introduce short fog pulses while keeping hands and the supply assembly clear of the observed airflow pattern.
الخصائص الرئيسية
Low-momentum output helps the tracer follow the local airflow rather than drive it.
Trigger control supports short, repeatable visualization pulses.
Replaceable fluid cartridge simplifies preparation between study points.
Smooth exterior surfaces allow routine wipe-down before controlled-area use.
Compact case format supports transport with study accessories.
حلول للتطبيق الخاص بك
Localized smoke studies need a visible tracer close to the point of interest without a bulky supply unit or excessive outlet momentum altering the observed air path.
A floor-standing fog generator is awkward at small test locations.The balanced handheld body positions the outlet directly beside localized airflow boundaries.
A strong tracer jet can disturb the pattern under evaluation.The short delivery path is designed for a gentle visible discharge controlled by the trigger.
Long continuous fog output can obscure the observation area.Momentary operation allows the technician to introduce brief pulses as each camera view is recorded.
Study equipment must be prepared efficiently between controlled-area visits.A removable cartridge and smooth exterior simplify fluid handling and routine wipe-down.
تطبيقات نموذجية
Localized cleanroom airflow visualizationHEPA filter coverage demonstrationsIsolator and RABS smoke studiesPass-through and doorway flow observationEquipment wake and turbulence investigation
المعلمات الفنية
Representative handheld fogger construction is summarized below; nozzle geometry, cartridge capacity and control accessories can be selected for the intended study method.
| المواد الأساسية | Engineering-polymer handpiece, stainless fluid path, replaceable fog-fluid cartridge and electronic atomizer |
|---|---|
| سمك اللوحة | Typically 2-3 mm for molded handpiece shell sections |
| العرض الفعال | Approximately 45-75 mm across the handheld body |
| الحد الأقصى الطول | Approximately 220-350 mm including outlet nozzle |
| الصلب يواجه سمك | Typically 0.5-1.0 mm for stainless internal fluid-path components |
| الكثافة الأساسية | Approximately 1040-1200 kg/m³ for the engineering-polymer housing |
| الموصلية الحرارية | Approximately 0.18-0.30 W/(m·K) for the polymer housing |
| إنهاء السطح | Smooth white and blue wipe-clean housing with satin stainless nozzle and clear fluid cartridge |
| نوع المشترك | Sealed cartridge coupling with removable directional outlet nozzle |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Straight or angled outlet nozzleAlternative cartridge capacitiesRechargeable battery packRemote trigger leadLED fog illuminationحقيبة نقل واقية
Planning a Airflow Visualization Fogger specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
