Airflow visualization fogger in three-quarter handheld instrument view

Приборы для испытаний и валидации в чистых помещениях

Визуализация воздушного потока Fogger

A compact handheld fog applicator delivering a controlled visible tracer for localized cleanroom airflow visualization and documented smoke studies.

Precise handheld tracer placement.
Gentle trigger-controlled fog pulses.
Compact wipe-clean study instrument.

Запрос котировки Просмотреть продукты

Введение продукции

This portable fogger places a fine, visible aerosol precisely at filter faces, transfer openings and equipment boundaries where a larger generator is cumbersome. Its pistol-style body integrates a small fluid cartridge, low-momentum delivery path and simple trigger control. The operator can introduce short fog pulses while keeping hands and the supply assembly clear of the observed airflow pattern.

Основные характеристики

Handheld format reaches confined process and barrier-system locations.

Low-momentum output helps the tracer follow the local airflow rather than drive it.

Trigger control supports short, repeatable visualization pulses.

Replaceable fluid cartridge simplifies preparation between study points.

Smooth exterior surfaces allow routine wipe-down before controlled-area use.

Compact case format supports transport with study accessories.

Решения для вашего приложения

Localized smoke studies need a visible tracer close to the point of interest without a bulky supply unit or excessive outlet momentum altering the observed air path.

A floor-standing fog generator is awkward at small test locations.The balanced handheld body positions the outlet directly beside localized airflow boundaries.

A strong tracer jet can disturb the pattern under evaluation.The short delivery path is designed for a gentle visible discharge controlled by the trigger.

Long continuous fog output can obscure the observation area.Momentary operation allows the technician to introduce brief pulses as each camera view is recorded.

Study equipment must be prepared efficiently between controlled-area visits.A removable cartridge and smooth exterior simplify fluid handling and routine wipe-down.

Типичные приложения

Localized cleanroom airflow visualizationHEPA filter coverage demonstrationsIsolator and RABS smoke studiesPass-through and doorway flow observationEquipment wake and turbulence investigation

Технические параметры

Representative handheld fogger construction is summarized below; nozzle geometry, cartridge capacity and control accessories can be selected for the intended study method.

Основной материал	Engineering-polymer handpiece, stainless fluid path, replaceable fog-fluid cartridge and electronic atomizer
Толщина панели	Typically 2-3 mm for molded handpiece shell sections
эффективная ширина	Approximately 45-75 mm across the handheld body
Максимальная длина	Approximately 220-350 mm including outlet nozzle
Толщина линий стали	Typically 0.5-1.0 mm for stainless internal fluid-path components
Плотность ядра	Approximately 1040-1200 kg/m³ for the engineering-polymer housing
Теплопроводимость	Approximately 0.18-0.30 W/(m·K) for the polymer housing
Поверхностная отделка	Smooth white and blue wipe-clean housing with satin stainless nozzle and clear fluid cartridge
Объединенный тип	Sealed cartridge coupling with removable directional outlet nozzle
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Straight or angled outlet nozzleAlternative cartridge capacitiesRechargeable battery packRemote trigger leadLED fog illuminationЗащитный транспортный корпус

Planning a Airflow Visualization Fogger specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой