Tiếng Anh
Tiếng Đức, tiếng Đức
Tiếng Ả Rập, tiếng Ả Rập
Tiếng Pháp, tiếng Pháp
Tiếng Indonesia (tiếng Việt)
Tiếng Nhật
Tiếng Hàn / tiếng Hàn
Tiếng Mã Lai
Tiếng Bồ Đào Nha, tiếng Bồ Đào Nha
Tiếng Nga, tiếng Nga
Tiếng Tây Ban Nha, tiếng Tây Ban Nha
Tiếng Thái (tiếng Thái)
Tiếng Thổ Nhĩ Kỳ, tiếng Thổ Nhĩ Kỳ
Tiếng Việt / tiếng ViệtHiện tại
Colour within the wearing body
The chip structure extends through the wear section, so its appearance is not provided by a thin printed image immediately beneath a clear surface film.
STJH-HYGIENIC-CLEANROOM-VINYL-SHEET-FLOORING-PRESSED-20
Hygienic Cleanroom Vinyl Sheet Flooring Pressed-Chip Multilayer
A compact layered vinyl with a thick pressed-chip wear body and glass-fibre reinforcement.
- At least 1.02 mm pressed wear section
- 2 mm overall compact construction
- Glass-fibre grid reinforcement
About This Product
The international reference construction combines a wear section of at least 1.02 mm with a compact backing and glass-fibre grid within a 2 mm sheet. Densely pressed chips form the visible wearing material without a separate transparent wear film. This construction suits hygienic interiors that need a substantial coloured wear body while retaining a low overall floor build-up.
Các tính năng chính
Reinforced layered support
The glass-fibre grid sits within a compact assembly that helps maintain the sheet geometry during installation and service, distinct from an unreinforced single-material body.
Accessible hygienic edges
Heat welding and coved perimeter detailing create a practical cleaning arrangement around room corners. Use well-supported joints where trolleys repeatedly turn or cross thresholds.
Thông số kỹ thuật
| Construction | Pressed-chip wear body with compact backing |
|---|---|
| Overall Thickness | 2 mm |
| Wear Section Thickness | >= 1.02 mm |
| Reinforcement | Glass-fibre grid |
| Roll Width | 2,000 mm |
| Roll Length | 20,000 mm |
| Wear Layer Type | Unfilled PVC without transparent wear film |
| Surface Treatment | Factory UV-crosslinked maintenance finish |
| Seam and Perimeter | Heat welding with coved wall junctions |
| Tùy chỉnh | Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động. |
Applications
Use in non-ESD laboratories and hygienic controlled process rooms where compact welded sheet is appropriate. The selection emphasizes layer construction and cleanable detailing rather than a claimed universal cleanroom class. Cleaning chemistry, equipment contact and floor-to-wall transitions should be considered together when selecting the complete room finish.
Solutions for Your Application
A printed surface has insufficient wear depth for the planned traffic.
Select the thick pressed-chip wearing section and keep heavy turning loads away from poorly supported joins.
A hygienic floor develops hard-to-clean square wall corners.
Use compatible coving and welded corner details so cleaning tools can follow the perimeter without leaving inaccessible recesses.
Các tùy chọn có sẵn
Choose an available chip pattern, matching weld rod and cove height. Retain the international wear-layer construction when specifying this model so thinner regional alternatives are not substituted into the same supply.
Planning a Hygienic Cleanroom Vinyl Sheet Flooring Pressed-Chip Multilayer specification?
Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.
