Tiếng Anh
Tiếng Đức, tiếng Đức
Tiếng Ả Rập, tiếng Ả Rập
Tiếng Pháp, tiếng Pháp
Tiếng Indonesia (tiếng Việt)
Tiếng Nhật
Tiếng Hàn / tiếng Hàn
Tiếng Mã Lai
Tiếng Bồ Đào Nha, tiếng Bồ Đào Nha
Tiếng Nga, tiếng Nga
Tiếng Tây Ban Nha, tiếng Tây Ban Nha
Tiếng Thái (tiếng Thái)
Tiếng Thổ Nhĩ Kỳ, tiếng Thổ Nhĩ Kỳ
Tiếng Việt / tiếng ViệtHiện tại
Simplified periodic care
Avoiding routine wax renewal removes a recurring wet maintenance step. Cleaning teams can focus on soil removal and the condition of joints and thresholds.
STJH-HOMOGENEOUS-PVC-SHEET-FLOORING-NW20
Homogeneous PVC Sheet Flooring No-Wax
Factory-treated homogeneous vinyl designed for a maintenance routine without repeated wax application.
- Factory-treated wearing surface
- Full 2 mm homogeneous body
- No routine waxing in the maintenance approach
About This Product
This 2 mm homogeneous sheet combines a full-depth wear body with a factory-applied surface treatment. The configuration addresses rooms where repeated stripping and reapplication of floor polish would disrupt work or complicate maintenance. Its compact format is supplied as 2 m wide rolls for bonded installation. The selected cleaning method should preserve the treatment while removing deposits from routine laboratory and corridor traffic.
Các tính năng chính
Consistent wear material
The wearing section extends through the sheet rather than ending at a printed decoration layer, supporting long-term use where carts repeatedly follow the same route.
Stain-conscious surface
The factory treatment helps maintenance in rooms using common healthcare cleaning products. Actual chemical exposure should be addressed promptly, particularly beneath dispensing points.
Thông số kỹ thuật
| Material Structure | Homogeneous PVC |
|---|---|
| Total Thickness | 2 mm |
| Wear Layer | 2 mm full-depth body |
| Sheet Width | 2,000 mm |
| Roll Length | 20,000 mm |
| Nominal Mass | 2.8 kg/m² |
| Surface Treatment | Factory maintenance finish |
| Routine Finish Care | Cleaning without routine wax application |
| Joint System | Heat-welded sheet seams |
| Tùy chỉnh | Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động. |
Applications
Suitable for healthcare laboratories and controlled corridors where floor access for lengthy polish cycles is limited. The no-wax approach is a maintenance characteristic, not a claim that the floor needs no care. Remove spilled reagents and cleaning residues using a compatible procedure before they affect the finish or create a slippery film.
Solutions for Your Application
Periodic stripping disrupts a continuously used corridor.
Use a factory-treated sheet and a cleaning schedule that avoids routine wax renewal while retaining regular inspection of worn traffic zones.
Cleaning products leave a visible film around dispensers.
Remove deposits with a compatible cleaner and rinse as needed; do not conceal accumulated residue beneath additional polish.
Các tùy chọn có sẵn
Select the roll colour, matching welding material and cleanable perimeter detail. Keep spare sheet from the same supply for local repairs, and choose cleaning pads compatible with the factory treatment.
Planning a Homogeneous PVC Sheet Flooring No-Wax specification?
Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.
