STjh 584 mm continuous liner discharge system for a 15 m liner

STJH-CONTINUOUS-LINER-DISCHARGE-SYSTEM-584X15M

Continuous Liner Discharge System 584 mm × 15 m

A 584 mm diameter, 15.2 m continuous liner for repeated contained powder pack-off into production drums.

584 mm sleeve diameter
15.2 m production roll
Repeated drum pack-off

Giới thiệu Sản phẩm

The 23-inch sleeve provides a drum-scale receiving diameter while the 15.2 m supply supports multiple changes before the canister needs reloading. It is intended for powder take-off points where operators must exchange filled drums without exposing the discharge interface or bringing the drum into the primary containment zone.

Các tính năng chính

Drum-scale opening

The 584 mm tube forms a broad package for powder collection without forcing material through a narrow neck.

Campaign-ready length

The 15.2 m roll balances multiple drum changes with manageable film storage on the outlet canister.

External receiver handling

The drum remains outside the process enclosure, reducing the surfaces that must be cleaned after discharge.

Thông số kỹ thuật

Nominal Liner Diameter	584 mm (23 in)
Supplied Length	15.2 m (50 ft)
Film Construction	Multilayer pharmaceutical containment film
Film Compliance	FDA- and EU-compliant grades available
Typical Canister Interface	203 or 305 mm (8 or 12 in)
Receiving Package	Drum-supported liner section
Change Sequence	Crimp, cut and advance for the next container
Performance Reference	Below 1 µg/m³ reported for applicable manufacturer installations
Primary Duty	Repeated contained powder pack-off
Tùy chỉnh	Film formulation, canister transition and closure method can be configured for the powder, drum and operating environment.

Applications

Multi-drum collection beneath mills, blenders, isolators and other pharmaceutical powder equipment requiring repeated closed pack-off.

Solutions for Your Application

Changing a full drum could expose operators to residual powder at the outlet.Close and separate the loaded liner section before advancing clean film for the next drum connection.

A very long roll is unnecessary for a moderate batch and increases loaded-film bulk.Choose the 15.2 m supply for production runs whose planned drum count does not justify the extended 30.5 m version.

Các tùy chọn có sẵn

Antistatic film, 203 or 305 mm outlet hardware, tapered transitions, CrimpLoc closures, multi-O-ring canisters and banding accessories may be configured.

Planning a Continuous Liner Discharge System 584 mm × 15 m specification?

Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.

Nói chuyện với đội ngũ của chúng tôi