İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Serviceable floor divisions
Keeping finish joints aligned with panel boundaries allows technicians to expose a service bay without cutting through a continuous sheet or disturbing neighbouring workstations.
STJH-STATIC-DISSIPATIVE-PVC-FLOORING-RA20
Static-Dissipative PVC Flooring Raised-Access Tile
A dissipative vinyl finish arranged as individual tiles to preserve access to underfloor services.
- Individual removable-panel finish
- 608 mm reference square format
- Dissipative electrical selection
About This Product
The raised-access configuration uses a 2 mm homogeneous PVC tile with a dissipative resistance selection of 10^6 to 10^8 ohms. A 608 mm reference square format allows the finish to be prepared around individual supporting modules. The system is selected where access to cabling or instrumentation is as important as charge control. Structural support comes from the panel beneath the tile.
Ana Özellikler
Compatible electrical assembly
The dissipative wearing tile works with the adhesive and grounded panel system. Correct bonding matters across the tile area, including corners and perimeter details.
Manageable local repair
A worn tile can be replaced on its individual support module, helping maintain a consistent service layout after changes to racks, benches or cable routes.
Teknik parametreler
| Material | Homogeneous dissipative PVC |
|---|---|
| Finish Thickness | 2 mm |
| Reference Tile Dimensions | 608 x 608 mm |
| Electrical Range | 10^6–10^8 Ω |
| Backing Support | Rigid raised-access panel |
| Bonding | Compatible conductive adhesive |
| Module Access | Individually removable supporting panels |
| Edge Detail | Panel-aligned trimmed finish |
| Routine Care | ESD-compatible cleaning |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Applications
Use in instrumentation rooms, microelectronics suites and technical spaces with frequently changed service routes. Match the tile preparation to the exact access-panel dimensions and edge treatment. During maintenance, protect exposed panel edges and return each module to its correct support position before restoring the area to use.
Solutions for Your Application
Panel removal damages a floor finish spanning several modules.
Laminate and trim the dissipative tiles separately so service access remains within the original panel grid.
A repaired module has different electrical behaviour from adjacent tiles.
Use matching dissipative material and the same compatible adhesive, then verify the replacement within the complete grounded floor.
Mevcut Seçenekler
Select colour, panel-edge preparation and the supporting floor system. Keep spare finished modules for service work, and identify lifting points that remain usable without damaging the thin PVC wearing layer.
Planning a Static-Dissipative PVC Flooring Raised-Access Tile specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
