STjh compact 4 by 4 foot mobile laminar-flow hood with one HEPA unit, vinyl sidewalls and caster frame

STJH-MOBILE-LAMINAR-FLOW-HOOD-4X4

Mobile Laminar Flow Hood 4 × 4 ft

A compact wheeled clean-air enclosure for temporary protection over a benchtop instrument or small machine.

Approximately 4 x 4 ft interior
Locking caster mobility
Antistatic vinyl sidewalls

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The 4 x 4 ft mobile hood creates a three-sided clean zone around a compact work footprint. Antistatic vinyl panels hang below one or two overhead HEPA fan-filter units, and locking casters allow the enclosure to move between tasks. Its small plan is intended for one bench or machine rather than the longer multi-station uses of the 6 ft and 8 ft models.

Ana Özellikler

Move-to-process protection

The wheeled frame brings filtered air to equipment that cannot be permanently enclosed.

Compact overhead filtration

One or two HEPA FFUs provide coverage for a small workstation footprint.

Flexible three-sided boundary

Antistatic vinyl panels reduce lateral particle intrusion while preserving front access.

Teknik parametreler

Inside Footprint	Approximately 4 x 4 ft
Airflow Direction	Vertical downflow
Final Filter	HEPA
Fan-Filter Quantity	One or two units by configuration
Sidewalls	Antistatic vinyl, three-sided
Frame	Portable rigid canopy
Mobility	Locking casters
Access	Open front
Typical Load	Bench instrument or small machine
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Applications

For temporary clean work over compact instruments, maintenance tasks and small medical-device operations. Lock the casters and verify curtain clearance before starting the process.

Solutions for Your Application

The critical instrument changes location between work areas.Roll the compact hood to the process and lock all casters before operation.

An oversized portable booth obstructs narrow aisles.Use the four-foot footprint for a single compact station.

Mevcut Seçenekler

Select one or two HEPA FFUs, curtain arrangement, frame finish, lighting and electrical supply. Height and caster type can be adapted to the supported equipment.

Planning a Mobile Laminar Flow Hood 4 × 4 ft specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun