STJH-GASKET-SEAL-HEPA-H13-53

Gasket-Seal HEPA Filter 53 mm H13 Polyurethane

A shallow H13 panel with a poured polyurethane gasket for compact clamped-grid installations.

53 mm shallow pack
H13 final filtration
Seamless PU foam gasket

Alıntı isteği Browse ürünleri

Ürün tanıtımı

This 53 mm H13 filter combines a microglass mini-pleat pack with an anodized aluminum frame and a continuous polyurethane foam gasket. The low pack depth preserves space inside ceiling grids and OEM laminar-flow modules, while the poured gasket removes corner joints that can compress unevenly. Select it when the housing uses face compression rather than a gel trough or knife-edge interface.

Ana Özellikler

Compact terminal depth

The 53 mm pack leaves more clearance for lighting, ductwork or process-tool components above the filter plane.

Joint-free compression seal

A continuous polyurethane gasket avoids cut-and-joined corners and supports even clamping around the frame.

Serviceable aluminum frame

The lightweight anodized frame is easier to position in small ceiling cells without adding a deep box section.

Teknik parametreler

Filter Media	Microglass mini-pleat
Efficiency Class	H13
Pack Depth	53 mm
Frame Material	Anodized aluminum
Seal Type	Continuous polyurethane foam gasket
Pleat Separation	Hot-melt separators
Maximum Operating Temperature	71 C
Mounting Interface	Face-clamped gasket grid
Recommended System Position	Cleanroom terminal or OEM laminar-flow module
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Applications

Designed for compact cleanroom ceiling grids, clean benches and OEM laminar-flow devices that clamp the filter face against a flat sealing land. The H13 grade suits controlled processes whose risk assessment does not require H14; installed performance still depends on correct gasket compression and housing integrity.

Solutions for Your Application

A deep terminal filter conflicts with services in a crowded ceiling void.The 53 mm pack reduces filter depth while retaining an H13 mini-pleat construction for final-air duty.

A field-applied strip gasket opens at the corners after repeated filter changes.The seamless poured PU gasket eliminates corner splices; clamp force should be checked evenly around the frame during installation.

Mevcut Seçenekler

Confirm face dimensions, airflow duty, gasket face, gasket compression allowance and protective grille orientation for the receiving grid.

Planning a Gasket-Seal HEPA Filter 53 mm H13 Polyurethane specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun