STjh large 700 by 636 by 700 mm stainless transfer hatch with oversized laminated-glass door and deep chamber

STJH-CLEANROOM-TRANSFER-HATCH-700X636X700

Cleanroom Transfer Hatch 700 × 636 × 700 mm

The largest standard hatch in the series for bulky totes, wide component packs and larger clean production loads.

700 mm large loading face
636 mm deep chamber
Karşılıklı kapılar açıldı

Alıntı isteği Browse ürünleri

Ürün tanıtımı

A 700 mm square face and 636 mm chamber depth give this model enough volume for bulky closed loads that cannot pass through the smaller standard hatches. The double-skin stainless enclosure supports routine cleanroom sanitation, while the mechanical interlock controls opposing manual doors. Its larger body is intended for planned wall openings with adequate support and swing clearance.

Ana Özellikler

Bulky tote handling

The wider and deeper chamber reduces the need to tip large containers while passing them across the wall.

Rigid stainless enclosure

Double-skin construction provides a durable transfer body for frequent material movement.

Projecting or flush fit

Wall flanges allow the substantial chamber to be positioned around the available partition depth.

Teknik parametreler

Nominal Dimensions	700 W x 636 D x 700 H mm
Body Construction	Double-skin 1.5 mm stainless steel
Standard Material	304 stainless steel
Optional Material	316 stainless steel
Door Type	Manual hinged opposing doors
Interlock	Mechanical one-door-at-a-time
Window Options	Acrylic or stainless-framed safety glass
Installation	Flush or projecting wall-flange installation
Typical Load	Bulky totes and packaged production components
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Applications

For large packaged components, closed production totes and wide equipment parts moving between clean manufacturing zones. Structural support, clear approach space and the loaded container mass should be reviewed for this larger wall opening.

Solutions for Your Application

Wide process totes cannot remain level in a medium hatch.Use the 700 mm face and 636 mm depth after checking the tote lid, handles and operator reach.

A large door leaf may interfere with nearby carts or workstations.Choose door handing and projection so both room-side swing envelopes remain clear.

Mevcut Seçenekler

Specify 304 or 316 stainless steel, solid or glazed doors, wall trim depth, shelf reinforcement and interlock style. Additional load supports can be sized to the transferred items.

Planning a Cleanroom Transfer Hatch 700 × 636 × 700 mm specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun