İngilizce
Portekizce
İspanyolca
Malay dilinde
Endonezya dilinde
Almanca
TürkçeCurrent
Vietnamca
Fransızca
Rusça
Arapça
Taylandca
Japonca
Korece
Endüstriye Özel Temiz Oda Ekipmanları
Split Kelebek Valfi
A dockable stainless-steel split butterfly valve that creates a closed transfer path between process equipment and mobile containers while limiting powder exposure at disconnection.
- Dockable Split-Disc Design
- Hygienic Stainless Construction
- Interlocked Transfer Sequence
- Cleanable Product Contact Parts
Ürün tanıtımı
The split butterfly valve uses an active operating half and a passive container half whose disc faces dock before the flow path opens. When coupled, the two disc segments act as one butterfly disc; after transfer, they close before separation so product-contact faces remain covered. A compact stainless body, replaceable elastomer seals and mechanical position control support contained charging and discharge duties where conventional open connections would release dust.
Ana Özellikler
Split-disc faces remain covered during normal connection and disconnection sequences.
Satin stainless product-contact surfaces support repeatable cleaning and inspection.
Mechanical locking prevents opening until the mating halves are correctly engaged.
Uygulamanız için çözümler
Powder transfers can expose operators, contaminate adjacent rooms and leave difficult-to-clean residue on open connection faces.
Breaking a conventional hose or flange can release residual powder.The two disc halves close before undocking, covering the product-contact interface during separation.
Incorrect connection sequencing can open an incomplete transfer path.Mechanical docking and operating interlocks control the order of coupling, opening, closing and release.
Valve internals can retain material between campaigns.Smooth product-contact surfaces and accessible seals simplify disassembly, cleaning and visual inspection.
Different vessels require a repeatable portable connection.A standardized passive half can be fitted to compatible containers while the active half remains at the process station.
Tipik uygulamalar
Potent API charging and dischargeTablet and capsule powder transferContained blender and granulator connectionsIntermediate bulk container docking
Teknik parametreler
Typical configurable construction values for a hygienic pharmaceutical split butterfly valve are listed below.
| Temel malzemeler | 316L stainless-steel active and passive bodies with FDA-compatible elastomer seals |
|---|---|
| Panel kalınlığı | 18-35 mm combined valve-body section |
| Effective Width (Etkili Genişlik) | 100-250 mm nominal transfer diameter |
| Maksimum uzunluk | Up to 420 mm overall body and lever envelope |
| Çelik yüz yüze kalınlığı | 3-8 mm machined product-contact wall section |
| Core Density (Çekirdek Yoğunluğu) | Paslanmaz çelik konstrüksiyon için 7950-8050 kg/m³ |
| Termal İletkenlik | Östenitik paslanmaz çelik için 14-16 w/(m · k) |
| Yüzey bitirme | Satin exterior with smooth electropolished or mechanically polished product-contact surfaces |
| Ortak tip | Interlocked active-passive docking joint with split disc and replaceable perimeter seals |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Manual or automated active-half operationAlternative nominal transfer diametersEPDM, silicone or FKM seal setsContainer, hopper or process-vessel mounting adapters
Planning a Split Butterfly Valve specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
