İngilizce
Portekizce
İspanyolca
Malay dilinde
Endonezya dilinde
Almanca
TürkçeCurrent
Vietnamca
Fransızca
Rusça
Arapça
Taylandca
Japonca
Korece
Temiz Oda Drenajı, Hijyen ve Güvenlik Ekipmanları
Oksijen eksikliği monitörü
A fixed oxygen monitor that warns occupants and ventilation controls when inert gas displaces breathable air.
- Continuous Oxygen Display
- Low-Oxygen Alarm Stages
- Yerel işaret ve siren
- Ventilation Relay Output
Ürün tanıtımı
The oxygen deficiency monitor continuously measures ambient oxygen with a replaceable electrochemical or optical sensor and presents the value on a local display. Configurable low-level alarms operate relays, beacon and sounder outputs before conditions become severe. Remote heads can be positioned at the breathing zone or according to the release scenario while the display remains visible outside the room.
Ana Özellikler
Two alarm stages support ventilation and evacuation actions.
Sensor and system faults are separated from gas alarms.
Remote outputs integrate with ventilation and access-control logic.
Uygulamanız için çözümler
Inert gases are odorless and can displace oxygen without visible warning, especially in enclosed utility spaces.
Personnel cannot sense oxygen depletion directly.A fixed sensor continuously measures and displays oxygen concentration.
A single high alarm provides little time for corrective action.Staged low alarms can start ventilation before evacuation level.
Sensor end-of-life can mimic a safe reading.Fault monitoring and scheduled replacement maintain measurement integrity.
The safest display location may differ from the sensing point.Remote-sensor configurations separate the room sensor from the entrance display.
Tipik uygulamalar
Nitrogen utility roomsCryogenic storage areasInert-gas process suitesLaboratory gas storage
Teknik parametreler
Typical monitor construction is listed below; sensor placement and alarm setpoints follow the inert-gas risk assessment.
| Temel malzemeler | Powder-coated steel or polymer enclosure with oxygen sensor electronics |
|---|---|
| Panel kalınlığı | 1.0-1.5mm metal muhafaza |
| Effective Width (Etkili Genişlik) | 150-300 mm |
| Maksimum uzunluk | Up to 450 mm enclosure height |
| Çelik yüz yüze kalınlığı | 1.0-1.5mm çelik muhafaza panelleri |
| Core Density (Çekirdek Yoğunluğu) | Çelik muhafaza parçaları için 7850 kg/m³ |
| Termal İletkenlik | Çelik muhafaza bileşenleri için 45-60 W/(m · K) |
| Yüzey bitirme | Smooth light-gray coating with high-visibility alarm indicators |
| Ortak tip | Gasketed enclosure with pluggable sensor, relay and power terminals |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Integral or remote sensorDual alarm relaysBeacon and sounderAnalog or network output
Planning a Oxygen Deficiency Monitor specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
