Cytotoxic containment isolator with negative-pressure glove chamber

Laminar Flow ve Containment Equipment

Sitotoksik Containment Isolator

A negative-pressure glovebox that contains cytotoxic and other hazardous drug preparation through sealed manipulation, transfer and waste paths.

Negative-Pressure Hazardous Drug Chamber
Closed Glove Manipulation
Staged Exhaust Filtration
Contained Waste Egress

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The cytotoxic isolator encloses hazardous drug manipulation inside a negative-pressure stainless chamber. Glove ports provide operator access, while an interlocked transfer chamber introduces materials without opening the main work zone. Exhaust air passes through staged high-efficiency filtration, and sharps, liquid and solid waste can leave through dedicated closed connections. The pressure and airflow arrangement prioritize personnel and environmental containment while maintaining a clean work zone for the product.

Ana Özellikler

Negative pressure keeps leakage direction inward toward the filtered exhaust.

Glove manipulation separates the operator from hazardous drug aerosols and residues.

Staged exhaust filters provide redundant particulate retention.

A sealed transfer chamber limits direct room-to-work-zone openings.

Dedicated sharps and bag-out interfaces keep waste within closed routes.

Uygulamanız için çözümler

Hazardous drug work requires the work chamber, transfer route and waste system to maintain containment through the complete compounding cycle.

Waste containers leave the chamber through the clean supply route.Separate sharps, liquid and bag-out ports create dedicated egress paths.

A glove puncture weakens the primary barrier.Replaceable glove rings and integrity-test connections support routine barrier management.

Filter service exposes concentrated hazardous residue.Contained filter-change housings isolate loaded exhaust stages.

Pressure becomes positive during exhaust failure.Pressure monitoring and exhaust interlocks alarm or stop operation when containment is lost.

Tipik uygulamalar

Cytotoxic drug compoundingAntineoplastic preparationHazardous sterile admixturesOncology pharmacy manipulation

Teknik parametreler

Typical configurable construction ranges for a cytotoxic containment isolator are listed below.

Temel malzemeler	Welded SUS316L negative-pressure chamber with laminated glass, CSM gloves and staged safe-change exhaust filters
Panel kalınlığı	50-100 mm double-skin chamber and exhaust sections
Effective Width (Etkili Genişlik)	1200-3000 mm usable compounding width
Maksimum uzunluk	Up to 4500 mm overall isolator length
Çelik yüz yüze kalınlığı	2.0-3.0 mm SUS316L chamber; 1.2-1.5 mm service skins
Core Density (Çekirdek Yoğunluğu)	SUS316L oda malzemesi için yaklaşık 8000 kg/m³
Termal İletkenlik	Östenitik paslanmaz çelik için 14-16 w/(m · k)
Yüzey bitirme	Electropolished SUS316L interior with welded spill-retaining lower pan
Ortak tip	Pressure-tight welded chamber with sealed glove rings, gasketed transfer hatch and contained exhaust-filter collars
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Two to four glove positionsSharps and liquid waste portsBag-out solid-waste systemIntegrated glove integrity tester

Planning a Cytotoxic Containment Isolator specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun