แสงสว่างห้องสะอาดและอุปกรณ์ไฟฟ้า
ซ็อกเก็ตห้องสะอาดกันน้ํา
A washdown-oriented power outlet with a gasketed protective cover that closes over the receptacle when it is not in use.
- ฝาครอบบานพับปะเก็น
- จานทนต่อการซัก
- Sealed Rear Enclosure
- บานพับสแตนเลสและสกรูเชลย
การแนะนําสินค้า
ซ็อกเก็ตกันน้ำเพิ่มฝาครอบสปริงหรือสลักไว้เหนือโมดูลพลังงานปิดภาคเรียนปะเก็นแยกต่างหากปิดผนึกฝาครอบกับแผ่นปิดหน้าและซีลปกปิดอื่นๆปิดแผ่นกับผนังบานพับสแตนเลสและขอบหยดที่เกิดขึ้นโดยตรงน้ำห่างจาก Receptacle ในขณะที่ต่อมปกป้องสายเคเบิลขาเข้าที่กล่องด้านหลัง
คุณสมบัติที่สําคัญ
A molded cover seal compresses around the receptacle opening.
Stainless hinge components resist repeated wet operation.
The sloped cover edge sheds droplets away from the socket face.
A sealed rear enclosure prevents water bypass through the wall cavity.
โซลูชันสำหรับแอปพลิเคชันของคุณ
เต้าเสียบที่ครอบคลุมต้องเก็บน้ำให้ห่างจากหน้าสัมผัสที่มีชีวิตโดยไม่กลายเป็นกระเป๋าที่ลึกและทำความสะอาดได้ยาก
Spray reaches the contacts of an uncovered receptacle.A gasketed lid shields the socket whenever no plug is connected.
Water pools on a horizontal cover ledge.The profiled face and drip edge direct liquid away from the opening.
A corroded hinge stops the cover closing fully.Stainless hinge pins and retained springs preserve reliable closure.
Moisture travels behind the plate through the supply cable.The rear box uses a dedicated compression gland around the cable.
การใช้งานทั่วไป
Damp cleanroomsWashdown utility zonesFood-process clean areasEquipment cleaning bays
พารามิเตอร์ทางเทคนิค
Typical configurable construction ranges for a waterproof cleanroom socket are listed below.
| วัสดุหลัก | SUS316L faceplate and cover with engineering-polymer receptacle, elastomer seals and enclosed rear box |
|---|---|
| ความหนาของแผง | 2.0-4.0 mm cover and sanitary plate thickness |
| ความกว้างที่มีประสิทธิภาพ | 130-260 mm covered outlet width |
| ความยาวสูงสุด | Up to 340 mm overall plate height |
| ความหนาของเหล็กหันหน้า | 2.0-3.0 mm SUS316L exposed plate and lid |
| ความหนาแน่นหลัก | Approximately 7900-8000 kg/m³ for the stainless exposed components |
| การนําความร้อน | 14-16 W/(m·K) for the stainless cover and plate |
| เสร็จสิ้นพื้นผิว | Fine-brushed or electropolished stainless with colored watertight receptacle insert |
| ประเภทร่วม | Gasketed hinged lid over a flush socket plate with concealed wall seal and rear cable gland |
| การปรับแต่ง | สามารถใช้ได้ตามแอปพลิเคชันที่ตั้งใจไว้และสภาพแวดล้อมการทํางาน |
ตัวเลือกที่มีอยู่
Single or dual covered outletRegional or IEC pin configurationInterlocked coverLockable lid
Planning a Waterproof Cleanroom Socket specification?
ส่งมิติของคุณเงื่อนไขการติดตั้งเป้าหมายประสิทธิภาพและผิวที่ต้องการ

ภาษาอังกฤษ
ภาษาโปรตุเกส
ภาษาสเปน
ภาษามาเลย์
ภาษาอินโดนีเซีย
ภาษาเยอรมัน
ภาษาตุรกี
ภาษาเวียดนาม
ฝรั่งเศส
ภาษารัสเซีย
ภาษาอาหรับ
ภาษาไทยปัจจุบัน
ภาษาญี่ปุ่น
ภาษาเกาหลี