STJH-EXHAUST-HEPA-H14-GEL

Exhaust HEPA Filter H14 Gel-Seal

An H14 exhaust filter with a factory gel channel for critical housings that require a positive fluid sealing interface.

H14 critical exhaust grade
Integral gel channel
Shallow or deep pack selection

การแนะนําสินค้า

This model raises exhaust filtration to H14 and replaces face-gasket compression with an integral gel channel. The fluid interface accommodates the mating knife edge of a compatible terminal or containment housing and helps control perimeter bypass when correctly engaged. Frame depth may range from shallow mini-pleat to deep V-bank geometry, so purchasing must be based on the actual housing envelope and airflow rather than the seal name alone.

คุณสมบัติที่สําคัญ

Positive perimeter interface

The mating blade penetrates the gel trough to create a continuous seal without relying on broad face compression.

Critical-process efficiency

H14 media suits exhaust duties with a lower allowable particle penetration than the H13 gasket model.

Service-visible seal condition

Technicians can inspect the gel for contamination, displacement or surface damage during controlled replacement.

พารามิเตอร์ทางเทคนิค

Efficiency Class	H14
Media Configuration	Microglass mini-pleat or V-bank
Frame Depth Range	70-292 mm according to housing duty
Frame Material	Anodized aluminum or stainless steel
Seal Type	Integral gel channel
Mating Interface	Housing-mounted knife edge
Face Protection	Optional upstream or downstream guard
Change Access	Room-side or side-access by compatible housing
Primary Duty	Critical process exhaust particulate control
การปรับแต่ง	สามารถใช้ได้ตามแอปพลิเคชันที่ตั้งใจไว้และสภาพแวดล้อมการทํางาน

Applications

Chosen for pharmaceutical exhaust, containment support systems and other critical extract paths that use a verified knife-edge-to-gel interface. Installed integrity depends on correct gel depth, blade alignment, housing condition and leak testing of the complete assembly.

Solutions for Your Application

The gel-seal filter arrives in the right face size but will not engage the housing blade.Match trough location, gel depth, frame depth and knife-edge reach to the housing drawing before ordering.

Gel is disturbed during removal and contaminates the replacement sealing surface.Use the housing's controlled change procedure, keep the new trough protected until installation and inspect the full perimeter after engagement.

ตัวเลือกที่มีอยู่

Select face dimensions, 70-292 mm construction depth, media pack style, gel chemistry, gel-side location, frame material and extraction provision.

Planning a Exhaust HEPA Filter H14 Gel-Seal specification?

ส่งมิติของคุณเงื่อนไขการติดตั้งเป้าหมายประสิทธิภาพและผิวที่ต้องการ

พูดคุยกับทีมงานของเรา