STJH 500 x 500 mm EC HEPA fan filter module with a shallow square stainless casing on white

STJH-EC-FAN-FILTER-UNIT-500X500-5CMM

STJH 500 x 500 mm EC Fan Filter Unit for Assembly Enclosures

A mid-size filtered-air module that expands coverage while retaining a low 185 mm overall height.

500 mm intermediate format
Approximately 5 m³/min delivery
185 mm overall height

การแนะนําสินค้า

The 500 mm version provides an intermediate filter face between the compact 400 mm unit and the higher-output 610 mm module. Its stainless casing houses one electronically controlled brushless fan above the final filter. The larger face distributes approximately 5 m³/min through an enclosure-sized supply opening without requiring a long rectangular roof panel.

คุณสมบัติที่สําคัญ

Intermediate face area

The square outlet suits medium work cells where the smallest unit leaves part of the working zone outside the supply footprint.

Shallow installation profile

The overall height remains the same as the 400 mm version, simplifying comparison where overhead space is fixed.

Stainless external surfaces

A bright annealed body offers smooth exposed surfaces for routine wiping around the enclosure roof.

พารามิเตอร์ทางเทคนิค

Nominal Module Dimensions	500 × 500 mm mounting footprint; 185 mm overall height including intake guard, excluding cable and service clearance
Nominal Airflow	Approximately 5 m³/min
Average Outlet Velocity	Approximately 0.39 m/s
Final Filter	HEPA; filtration configuration rated at least 99.99% at 0.3 µm
Housing Material	SUS430 stainless steel, bright annealed finish
Fan and Control	Single brushless DC fan; adjustable speed
Power Supply	AC 100 V, single phase, 50/60 Hz
Nominal Power Consumption	Approximately 28 W
Approximate Weight	10 kg
การปรับแต่ง	สามารถใช้ได้ตามแอปพลิเคชันที่ตั้งใจไว้และสภาพแวดล้อมการทํางาน

Applications

An option for component assembly covers, inspection cells and enclosed handling benches requiring a moderate filtered supply. Airflow coverage depends on the position of process equipment and the return openings, not on module dimensions alone.

Customer Product Concerns and Solutions

The compact module does not cover the width of the fixture.Position the 500 mm filter face over the working area and check that fixtures do not block delivery to critical surfaces.

A larger supply module will increase the required enclosure height.Compare the 185 mm overall height against the existing roof arrangement, including the additional inlet and maintenance clearance.

ตัวเลือกที่มีอยู่

Discuss the mounting interface, final-filter requirement and electrical supply for the assembly cell. Supply voltage must be specified when the unit is ordered; the reference configuration is not universal-input.

Planning a STJH 500 x 500 mm EC Fan Filter Unit for Assembly Enclosures specification?

ส่งมิติของคุณเงื่อนไขการติดตั้งเป้าหมายประสิทธิภาพและผิวที่ต้องการ

พูดคุยกับทีมงานของเรา