ผู้จัดจําหน่ายแบบครบวงจรสําหรับอุปกรณ์ห้องคลีนรูมและสิ่งจําเป็นสําหรับสิ่งอํานวยความสะดวกปลอดเชื้อการสนับสนุนโครงการระหว่างประเทศ
Open mobile navigationClose mobile navigation
STJH-AIR-TO-WATER-HEAT-PUMP-20KW

Air-to-Water Heat Pump 20 kW

A compact reversible air-to-water heat pump delivering about 20.1 kW heating and 18.5 kW cooling for small hydronic loads.
  • 20.1 kW-class heating
  • 18.5 kW-class cooling
  • Compact reversible scroll package
ขอใบเสนอราคา เรียกดูสินค้า

การแนะนําสินค้า

This smallest capacity band uses compact scroll and fan hardware to provide approximately 20.1 kW of heating and 18.5 kW of cooling. It serves small clean support rooms or utility loops that need reversible hydronic conditioning without a boiler-and-chiller pair.

คุณสมบัติที่สําคัญ

Two-season hydronic duty

The refrigeration cycle reverses between water heating and cooling for year-round support loads.

Small-load fit

Compact compressor and coil hardware suit a low-capacity loop without excessive equipment oversizing.

Air-source installation

Outdoor air supplies or absorbs heat without a cooling tower or ground loop.

พารามิเตอร์ทางเทคนิค

Heating Capacity20.1 kW class
Cooling Capacity18.5 kW class
CompressorScroll
RefrigerantR410A referenced range
Heat Source/SinkOutdoor air
Water CircuitReversible hydronic supply
Operating ModeHeating or cooling
Fan ArrangementCompact axial condenser fan
InstallationOutdoor packaged unit
การปรับแต่งWater temperature, pump package and ambient accessories can be configured for the intended application and operating environment.

Applications

Small clean support areas, laboratories, utility rooms and reversible heating or cooling loops for controlled spaces.

Solutions for Your Application

A small building requires both warm and chilled water but lacks space for two separate plants.Use the reversible 20 kW-class unit and switch operating mode according to the seasonal load.
A large heat pump would cycle frequently on the low water load.Match the compact capacity to the verified minimum load and provide adequate system water volume.

ตัวเลือกที่มีอยู่

Integrated pump, buffer tank, electric backup heat, freeze protection, low-ambient control, remote setpoint and communication can be selected.

Planning a Air-to-Water Heat Pump 20 kW specification?

ส่งมิติของคุณเงื่อนไขการติดตั้งเป้าหมายประสิทธิภาพและผิวที่ต้องการ

พูดคุยกับทีมงานของเรา
อีเมลถึงเรา WhatsApp WeChat

หน้าแรก

ผลิตภัณฑ์

ข่าวสาร

เกี่ยวกับเรา

ติดต่อเรา