Inglés
El portugués
EspañolCurrent
El malayo
Idioma indonesio
Alemán
El turco
El vietnamita
Francés
El ruso
El árabe
Tailandés
El japonés
Coreano
Equipos de HVAC y manejo de aire para salas limpias
Humidificador ultrasónicopor
A low-energy adiabatic humidifier that uses piezoelectric transducers to create a fine cool mist for direct-room or short-duct distribution.
- Piezoelectric Fine Mist
- Low Electrical Input
- Cool Adiabatic Output
- Modular Transducer Service
Introducción del producto
Piezoelectric transducers vibrate beneath a controlled shallow water level and break the surface into microscopic droplets. Internal blowers carry the mist from the stainless reservoir through top outlets, where it evaporates into dry air. Because the system does not boil water, electrical demand is low and the evaporation also provides a modest cooling effect.
Características clave
Low power consumption makes the technology suitable for continuous high-duty humidity control.
A stainless reservoir, level control and periodic drain cycle manage the transducer water surface.
Modular transducer plates and accessible blower components can be serviced from the front.
Soluciones para su aplicación
Ultrasonic systems need clean feed water, adequate absorption distance and accessible transducers to avoid mineral dust or wetting.
Minerals in atomized mains water settle as white dust.Reverse-osmosis or demineralized feed water limits dissolved solids carried into the air.
Large droplets fall before evaporating and wet nearby surfaces.Correct transducer output and blower airflow produce fine mist within the available absorption volume.
Biofilm forms in stagnant reservoir water.Automatic flushing, controlled refill and accessible stainless tank surfaces support hygienic maintenance.
A failed transducer reduces output across the complete unit.Modular transducer plates allow the affected section to be replaced independently.
Aplicaciones típicas
Salas limpias de electrónicaTextile and printing productionCold storage and produce roomsLaboratory environmental roomsDirect humidification of clean manufacturing spaces
Parámetros técnicos
Typical construction and size ranges for an industrial ultrasonic humidifier are shown below.
| Materiales Core | Stainless water reservoir with piezoelectric ceramic transducer modules |
|---|---|
| Panel de espesor | 1.0-1.5 mm stainless and powder-coated cabinet panels |
| Ancho efectivo | 500-1400 mm cabinet width |
| Longitud máxima | Up to 406 mm overall cabinet depth |
| Acero frente a espesor | 1.0-1.5 mm stainless enclosure sheet |
| Densidad Core | Approximately 7500-7800 kg/m³ for piezoelectric ceramic transducer material |
| Conductividad térmica | Approximately 1.2-2.0 W/(m·K) for piezoelectric ceramic |
| Superficie acabada | White-blue powder-coated exterior with smooth stainless wetted tank |
| Tipo conjunto | Bolted service cabinet with modular transducer plates, hose outlets and threaded water port |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
3-18 kg/h modular output configurationsDirect-room blower or duct connectionReverse-osmosis water packageHumidity controller, flush cycle and remote monitoring
Planning a Ultrasonic Humidifier specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
