STjh 10500 CFM vertical air handling unit with a tall wide cabinet and large blower section on white.

STJH-VERTICAL-AIR-HANDLING-UNIT-10500CFM

Vertical Air Handling Unit 10500 CFM

A large 10500 CFM vertical air handler with a 79 x 42.1 inch footprint and tall casing for high-volume treatment in constrained plant rooms.

10500 CFM nominal airflow
79 x 42.1 inch footprint
Up to 99.20 inch cabinet height

Solicite un presupuesto. Browse productos

Introducción del producto

The largest selected vertical AHU increases the footprint to 79 x 42.1 inches and the cabinet height to as much as 99.20 inches depending on fan choice. Its expanded fan, filter and coil hardware serves a high-volume controlled area while concentrating the equipment in an upright plant-room zone.

Características clave

High-volume upright platform

The tall stacked casing delivers central-scale airflow without the length of a horizontal multi-section unit.

Large component face

The 79 inch width accommodates substantial filter and coil area for the 10500 CFM duty.

Configurable fan height

Different fan selections alter overall height, allowing duty and plant-room clearance to be balanced.

Parámetros técnicos

Nominal Airflow	10500 CFM
Cabinet Width	79 in
Cabinet Length	42.1 in
Cabinet Height	80.23-99.20 in depending on fan selection
Airflow Arrangement	High-capacity vertical
Coil Options	Chilled water, hot water, DX or steam
Filter Face	Large flat or angled bank
Fan Section	Selected for high airflow and external pressure
Casing Construction	Single- or double-wall option
Customization	Overall height, coil duty and service access can be configured for the intended application and operating environment.

Applications

High-volume clean manufacturing, central pharmaceutical support, large controlled corridors and plant rooms where horizontal length is restricted.

Solutions for Your Application

A 10500 CFM horizontal unit would consume too much linear plant-room space.Use the vertical stack while verifying the selected 80.23-99.20 inch cabinet height against overhead clearance.

Large filters and coils are heavy and difficult to remove from a tight enclosure.Reserve full-width service clearance on the access side and coordinate component removal paths.

Opciones disponibles

Fan selection, water or DX coil, casing wall construction, filter bank, access side, stainless drain pan, attenuator and controls can be selected.

Planning a Vertical Air Handling Unit 10500 CFM specification?

Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.

Habla con nuestro equipo