Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
The standard coil face is too small for the required heating arrangement.
An enlarged downstream coil section provides space for the high-capacity hydronic configuration.
STJH-SINGLE-DUCT-VAV-REHEAT-TERMINAL-DN300-HW-HC
Single-Duct VAV Reheat Terminal Unit DN300 High-Capacity Hot-Water
Large hydronic VAV terminal with an expanded coil section for greater zone heating duty.
- Oversized coil face accommodates larger hydronic reheat duties.
- Broad inlet retains variable airflow control for larger zones.
Introducción del producto
The DN300 inlet serves a larger controlled air stream. An oversized hot-water coil casing enlarges the downstream heat-transfer face, with three-quarter-inch piping connections distinguishing this configuration from the compact hydronic unit.
Características clave
- Oversized coil face accommodates larger hydronic reheat duties.
- Broad inlet retains variable airflow control for larger zones.
Parámetros técnicos
| Nominal Inlet Size | 300 mm |
|---|---|
| Air System | Single-duct variable volume |
| Heating Configuration | High-capacity hot-water reheat |
| Pipe Connection | 3/4 in |
| Coil Arrangement | Oversized or high-capacity |
| Air Measurement | Multipoint pressure sensor |
| Controller Function | Pressure-independent airflow regulation |
| Casing | Galvanized steel |
| Outlet Form | Rectangular duct connection |
| Customization | Water coil and control options can be adapted to the intended zone load. |
Applications
- Large perimeter suites
- High-ventilation support areas with reheat
Solutions for Your Application
Opciones disponibles
- Low-water-temperature coil
- Discharge sound attenuator
Planning a Single-Duct VAV Reheat Terminal Unit DN300 High-Capacity Hot-Water specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
