Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Minimum ventilation can overcool a small zone.
The downstream water coil reheats the controlled supply stream when local heating is required.
STJH-SINGLE-DUCT-VAV-REHEAT-TERMINAL-DN150-HW
Single-Duct VAV Reheat Terminal Unit DN150 Hot-Water
Compact VAV terminal pairing airflow modulation with hot-water reheat for small zones.
- Hydronic reheat uses an available hot-water circuit.
- Multipoint sensing supports pressure-independent airflow control.
Introducción del producto
A DN150 inlet feeds a pressure-sensing section and modulating damper before the discharge coil. The hydronic section adds heat to the reduced supply airflow using paired half-inch water connections, allowing local temperature trim alongside variable-volume control.
Características clave
- Hydronic reheat uses an available hot-water circuit.
- Multipoint sensing supports pressure-independent airflow control.
Parámetros técnicos
| Nominal Inlet | 150 mm |
|---|---|
| System Type | Single-duct VAV |
| Reheat Medium | Hot water |
| Water Connection | 1/2 in |
| Sensor de flujo de aire | Multipoint pressure averaging |
| Control Mode | Pressure independent |
| Casing Material | Galvanized steel |
| Regulating Device | Actuated damper |
| Outlet Connection | Rectangular slip-and-drive type |
| Customization | Coil and control configuration can suit the intended zone and environment. |
Applications
- Small perimeter conditioned zones
- Laboratory support-room temperature trim
Solutions for Your Application
Opciones disponibles
- Acoustic lining
- Digital controller package
Planning a Single-Duct VAV Reheat Terminal Unit DN150 Hot-Water specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
