STJH-LOW-BORON-HEPA-H14-GASKET-24X24

Low-Boron HEPA Filter 24 × 24 in H14 Gasket-Seal

A 24-inch H14 separatorless low-boron panel with a dry gasket for semiconductor ceiling grids.

Low-boron microglass
24 x 24 in gasket format
350 cfm family duty

Solicite un presupuesto. Browse productos

Introducción del producto

This nominal 24 x 24 in model uses low-boron separatorless microglass media in a gasket-seal terminal format. The self-separating pack avoids strings, glue strips or separate pleat dividers that could add material to the airstream. Its family duty is 350 cfm at 100 fpm net face velocity, supporting unidirectional supply where boron contribution must be reduced.

Características clave

Boron-conscious media

The low-boron option addresses semiconductor processes that control dopant contribution from filtration materials.

Self-separating pleat pack

The media geometry maintains spacing without separate strings or strips in the clean-air path.

Dry-grid compatibility

A perimeter gasket seats against conventional clamped ceiling or terminal frames.

Parámetros técnicos

Nominal Face Size	24 x 24 in
Efficiency Option	H14 / 99.995% at MPPS
Media	Low-boron separatorless microglass
Family Rated Airflow	350 cfm at 100 fpm net face velocity
Pleat Support	Self-separating media geometry
Seal Type	Perimeter compression gasket
Application Focus	Boron-sensitive microelectronics process
Mounting	Gasket-seat terminal or ceiling grid
Changeout Check	Protect media and verify even clamp load
Customization	Disponible según la aplicación prevista y el entorno operativo.

Applications

Specified for semiconductor and microelectronics cleanrooms where airborne molecular or dopant control programs call for reduced boron contribution from HEPA media. The gasket configuration fits clamped terminal frames; it should not be used in a gel-grid receiver without the correct adapter.

Solutions for Your Application

Standard glass media adds an unacceptable boron source near a sensitive wafer process.Select the low-boron separatorless pack and document its material choice within the contamination-control plan.

A 24-inch replacement bypasses air because clamp force is concentrated at four points.Use a flat sealing land and distributed retainers to compress the gasket continuously around the perimeter.

Opciones disponibles

Specify actual frame dimensions, gasket material and face, efficiency selection, protective screen and required low-boron media grade.

Planning a Low-Boron HEPA Filter 24 × 24 in H14 Gasket-Seal specification?

Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.

Habla con nuestro equipo