Inglés
El portugués
EspañolCurrent
El malayo
Idioma indonesio
Alemán
El turco
El vietnamita
Francés
El ruso
El árabe
Tailandés
El japonés
Coreano
Accesorios de instalación de sala limpia
Acero inoxidable Rivet
A stainless steel blind rivet that forms a permanent mechanical joint where cleanroom sheet-metal components are accessible from only one side.
- One-Side Installation
- Stainless Construction
- Controlled Clamping
- Compact Flush Head
Introducción del producto
This blind rivet combines a tubular stainless sleeve, low-profile flange head and central pull mandrel. A compatible riveting tool draws the mandrel to expand the concealed end of the sleeve, clamping overlapping sheet-metal parts without rear access. The compact head suits trims, closures and light-gauge cleanroom fabrications where exposed fasteners should remain neat and easy to wipe.
Características clave
Stainless construction supports corrosion resistance in routinely cleaned interior environments.
The formed rear bulb spreads clamping force across thin sheet instead of relying on cut threads.
A low domed head creates a compact exposed profile on trims and closures.
Soluciones para su aplicación
Thin cleanroom sheet-metal parts often require a permanent joint even when finished panels block access to the rear surface.
Installers cannot hold a nut behind a closed panel or trim cavity.Blind-rivet setting forms the concealed retaining bulb entirely from the accessible face.
Ordinary carbon-steel fasteners can stain or corrode after repeated cleaning.A stainless sleeve and compatible mandrel provide improved corrosion resistance for controlled interiors.
Oversized fasteners distort light-gauge sheet around the fixing point.Correct rivet diameter, grip range and drilled-hole tolerance distribute clamp load without excessive tightening torque.
Protruding hardware creates an untidy, difficult-to-wipe surface.The compact domed flange leaves a smooth exposed head after the mandrel breaks.
Aplicaciones típicas
Cleanroom trim fasteningSheet-metal enclosure assemblyPanel closure stripsDoor and window frame accessoriesLight-duty duct and service covers
Parámetros técnicos
Typical construction and compatibility ranges for stainless blind rivets used with cleanroom sheet-metal accessories are listed below.
| Materiales Core | A2 or A4 stainless-steel sleeve with stainless pull mandrel |
|---|---|
| Panel de espesor | 0.8-6.0 mm combined material grip range |
| Ancho efectivo | 3.2-6.4 mm nominal rivet diameter |
| Longitud máxima | Up to 25 mm rivet body length |
| Acero frente a espesor | 0.30-0.80 mm tubular sleeve wall |
| Densidad Core | Aproximadamente 7900-8000 kg/m³ para acero inoxidable |
| Conductividad térmica | Aproximadamente 14-17 W/(m · K) para acero inoxidable austenítico |
| Superficie acabada | Natural passivated silver stainless-steel finish |
| Tipo conjunto | Blind mechanical fastening with mandrel-expanded sleeve and domed flange head |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
A2 or A4 stainless gradeStandard or large flange headMultiple diameters and grip rangesSealed-end body for reduced leakage paths
Planning a Stainless Steel Rivet specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
