Inglés
El portugués
EspañolCurrent
El malayo
Idioma indonesio
Alemán
El turco
El vietnamita
Francés
El ruso
El árabe
Tailandés
El japonés
Coreano
Muebles de sala limpia y productos de acero inoxidable
Sala limpia Garment Locker
A three-compartment Type 304L stainless personnel locker that separates each operator's clean garments and footwear behind an individually locked door.
- Three independent user compartments
- Individual keyed compression locks
- Hat shelf garment rail and shoe shelf
- Sloped top with raised cleanable base
Introducción del producto
The cleanroom garment locker divides a fully welded Type 304L stainless enclosure into three narrow, full-height personnel compartments. Each compartment has its own keyed compression lock, blue identification holder, upper hat shelf, stainless hanging rail and perforated lower shoe shelf, so one operator's gowning set does not mix with another's. The sloped roof removes a horizontal storage ledge, while integral stainless legs leave the floor visible beneath the locker. Folded door returns, sealed divider edges and radiused internal corners support direct wiping without exposed raw edges.
Características clave
An upper shelf, closed-loop hanger rail and perforated lower shoe shelf organize headwear, coveralls and footwear vertically.
Blue identification holders provide a visible assignment point without marking the stainless door surface.
The sloped roof and 150 mm raised base expose the areas where loose items and floor residue commonly accumulate.
Soluciones para su aplicación
Personnel garments need secure individual storage while the locker itself remains accessible for routine cleaning and assignment changes.
Shared cupboards allow operators to mix coveralls, headwear and personal footwear.Three full-height partitions and separately keyed doors maintain a clear boundary around each user's gowning set.
A single hanging rail leaves masks, hoods and shoes loose on the compartment floor.The hat shelf, closed-loop garment rail and perforated shoe shelf divide the compartment into dedicated storage zones.
Paper name labels leave adhesive residue on brushed stainless doors.Replaceable blue label inserts slide into fixed smooth-edged holders without bonding labels to the door skin.
Flat locker roofs and closed plinths create surfaces that are difficult to inspect.A pitched top discourages overhead storage and raised leveling feet keep the floor perimeter visible.
Aplicaciones típicas
Pharmaceutical cleanroom changing areasBiotechnology gowning roomsMedical-device cleanroom personnel entrancesMicroelectronics personnel airlocksHygienic food-production changing rooms
Parámetros técnicos
Typical configurable specifications for a three-compartment stainless cleanroom garment locker are listed below.
| Materiales Core | Type 304L stainless steel welded carcass with three full-height internal dividers, hat shelves, garment rails and perforated shoe shelves |
|---|---|
| Panel de espesor | 1.2–1.5 mm locker body, doors and internal partitions |
| Ancho efectivo | 900 mm overall width for three personnel compartments |
| Longitud máxima | 2000 mm maximum height at the rear of the sloped top |
| Acero frente a espesor | 1.2–1.5 mm Type 304L stainless door skins and enclosure panels |
| Densidad Core | 7900-8000 kg/m³ para acero inoxidable tipo 304L |
| Conductividad térmica | 14-16 W/(m · K) para acero inoxidable Tipo 304L |
| Superficie acabada | Brushed No. 4 stainless with blue identification holders, black keyed locks and blue non-marking leveling pads |
| Tipo conjunto | Continuously welded carcass and sealed dividers with folded-return doors, concealed hinges and individual compression locks |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
One- through ten-tier door arrangementsConstrucción electropulida tipo 316LElectronic combination or RFID locksPerforated doors for ventilated storage
Planning a Cleanroom Garment Locker specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
