Inglés
El portugués
EspañolCurrent
El malayo
Idioma indonesio
Alemán
El turco
El vietnamita
Francés
El ruso
El árabe
Tailandés
El japonés
Coreano
Puertas de sala limpia, ventanas y sistemas de bloqueo
Puerta corredera automática de sala limpia
A motorised cleanroom sliding doorset with touchless activation, adjustable travel, safety monitoring and a smooth insulated leaf for high-frequency hands-free passage.
- Touchless Automatic Operation
- Brushless Motor Drive
- Adjustable Opening and Closing
- Monitored Safety Sensors
Introducción del producto
The Automatic Cleanroom Sliding Door adds a compact drive motor, controller and safety sensors to an overhead sliding leaf. Foot, elbow, wave or access-control signals open the door without hand contact, while the controller monitors position and regulates acceleration and closing speed. A polyurethane-cored steel leaf keeps moving mass controlled, and the accessible operator cover allows routine adjustment without disturbing the wall opening.
Características clave
Controlled acceleration limits air disturbance and mechanical shock at the end positions.
Safety presence detection reverses or holds the leaf when the opening is occupied.
A low-mass polyurethane-cored leaf reduces the drive load for frequent cycles.
Integrated status contacts support interlocks, access control and building monitoring.
Soluciones para su aplicación
Automatic sliding doors must combine hands-free convenience with safe sensing, restrained air movement and accessible drive maintenance.
Operators carrying sterile materials cannot use a manual handle safely.Wave, foot or access-control activation opens the doorway without hand contact.
Fast leaf movement creates unnecessary air turbulence at the cleanroom boundary.Programmable acceleration, travel speed and hold-open time adapt movement to the traffic pattern.
A closing leaf can contact people or carts in the opening.Presence and anti-pinch sensors monitor the travel zone and command safe reversal.
Drive faults make a concealed operator difficult to service.A removable overhead cover exposes the motor, belt and controller from the room side.
Aplicaciones típicas
Pharmaceutical personnel routesHospital clean areasTouchless laboratory entrancesElectronics production corridorsHigh-frequency cleanroom material flow
Parámetros técnicos
Typical physical construction values for an automatic cleanroom sliding doorset are shown below.
| Materiales Core | Closed-cell rigid polyurethane foam |
|---|---|
| Panel de espesor | 40-50 mm sliding door leaf |
| Ancho efectivo | 750-1600 mm single-sliding clear opening |
| Longitud máxima | Altura máxima de hoja de 2400 mm |
| Acero frente a espesor | 0.8-1.0 mm powder-coated steel skins |
| Densidad Core | 40-45 kg/m³ polyurethane |
| Conductividad térmica | Rango típico de 0.022-0.028 W/(m·K) para el núcleo de poliuretano |
| Superficie acabada | Smooth powder-coated steel or brushed stainless steel |
| Tipo conjunto | Motor-driven overhead rail with monitored safety edge and perimeter brush/EPDM seals |
| Customization | Disponible según la aplicación prevista y el entorno operativo |
Opciones disponibles
Wave, foot or radar activationBattery backupBi-parting double leavesInterlock and access-control integration
Planning a Automatic Cleanroom Sliding Door specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
