Inglés
El portugués
EspañolCurrent
El malayo
Idioma indonesio
Alemán
El turco
El vietnamita
Francés
El ruso
El árabe
Tailandés
El japonés
Coreano
Equipos de sala limpia piezas de repuesto
Controlador de ducha
A compact programmable controller that sequences air shower doors, sensors, blower timing and operator status indications.
- Timed Shower Sequence
- Door Interlock Logic
- Sensor Input Control
- Clear Status Interface
Introducción del producto
The air shower controller coordinates the entry cycle between door sensors, electromagnetic locks, the circulation blower and user indicators. A sealed front interface provides cycle status and basic adjustment without exposing internal wiring. The enclosure protects the control electronics from routine cleaning and airborne dust. Replacement selection should match supply voltage, input type, relay load, door sequence and cabinet mounting space.
Características clave
Interlock outputs prevent opposing doors from being released at the same time.
Dedicated sensor inputs respond to occupancy and door-position signals.
A simple display, colored controls and status lamps aid operation and fault tracing.
Soluciones para su aplicación
A controller must coordinate doors and airflow reliably while remaining compatible with the existing sensors, locks and blower circuit.
Uncoordinated door releases can break the controlled entry sequence.Interlock logic holds the opposite door until the configured stage is complete.
Inconsistent blower timing produces variable cleaning cycles.Adjustable timer settings provide repeatable blower run and delay periods.
Different sensor signal types prevent direct replacement.Input configuration is matched to the installed occupancy and door-position devices.
Poor status visibility makes faults difficult to diagnose.The display and separate colored indicators communicate operating and attention states.
Aplicaciones típicas
Personnel air showersMaterial air showersCleanroom entry interlocksAir shower refurbishment and control upgrades
Parámetros técnicos
Typical enclosure and construction ranges for air shower sequence controllers are shown below.
| Materiales Core | Flame-retardant ABS enclosure with electronic control PCB and relay outputs |
|---|---|
| Panel de espesor | 45-90 mm nominal controller enclosure depth |
| Ancho efectivo | 120-220 mm nominal front-panel width |
| Longitud máxima | Up to 280 mm overall enclosure height |
| Acero frente a espesor | 1.0-1.5 mm optional stainless-steel mounting plate |
| Densidad Core | 1030-1200 kg/m³ para el material del recinto ABS |
| Conductividad térmica | 0,17-0,25 W/(m · K) para el material del recinto ABS |
| Superficie acabada | Smooth off-white molded enclosure with dark display bezel and colored controls |
| Tipo conjunto | Screw-secured gasketed cover with bottom cable gland and internal terminal connections |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Matched supply voltageCustom shower-cycle timingSingle- or double-door logicAlternative sensor and lock interfaces
Planning a Air Shower Controller specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
