Inglés
El portugués
EspañolCurrent
El malayo
Idioma indonesio
Alemán
El turco
El vietnamita
Francés
El ruso
El árabe
Tailandés
El japonés
Coreano
Filtro de aire y filtración química
Panel de filtro de carbón activado
A shallow molecular panel that places activated carbon in a bonded pleat or contained loose-fill bed for odor and VOC adsorption in HVAC systems.
- Broad-Spectrum Carbon Media
- Shallow Panel Format
- Low-Load Odor Control
- Standard HVAC Face Sizes
Introducción del producto
The activated carbon panel filter provides a compact gas-phase filtration stage for air handlers and recirculation units with limited depth. Activated carbon is either bonded to a porous support and pleated or retained as a thin granular bed between perforated screens. A galvanized-steel or moisture-resistant polymer frame holds the adsorbent uniformly across the face. The panel is suited to moderate concentrations of odors, ozone and volatile organic compounds, especially where a conventional particulate prefilter can protect the carbon surface from dust.
Características clave
The 25–100 mm panel depth fits standard HVAC holding frames without a separate deep-bed vessel.
Bonded or screened media construction limits loose-carbon movement and helps maintain an even bed.
A rigid perimeter frame supports front-access replacement in supply, return or recirculation sections.
Soluciones para su aplicación
Low-level gases and odors pass through ordinary particle filters, but many air handlers have room for only a shallow additional stage.
A particulate prefilter leaves VOCs and nuisance odors in the supply air.The activated-carbon layer adsorbs molecular contaminants that are too small for mechanical particle media.
A deep loose-fill carbon bank cannot fit the existing air handler.The shallow panel format adds a practical molecular stage within standard filter tracks.
Loose granules settle and create low-resistance bypass channels.Bonded carbon media or restrained screened cells hold the adsorbent evenly over the face.
Dust coats the carbon and blocks access to its internal pore structure.Using the panel behind an appropriate particulate prefilter protects available adsorption sites.
Aplicaciones típicas
Office and commercial HVAC odor controlCleanroom make-up air polishingLaboratory recirculation systemsMuseum and archive ventilationOutdoor-air intakes near traffic
Parámetros técnicos
Typical construction ranges for activated-carbon molecular panel filters are listed below.
| Materiales Core | Bonded activated-carbon nonwoven or granular activated carbon retained between porous support screens |
|---|---|
| Panel de espesor | 25–100 mm overall panel depth |
| Ancho efectivo | 287-610mm ancho de cara nominal |
| Longitud máxima | Hasta 610 mm de altura nominal de la cara |
| Acero frente a espesor | 0.5–0.8 mm galvanized-steel frame or perforated retaining screen |
| Densidad Core | Approximately 400–600 kg/m³ bulk density for granular activated carbon |
| Conductividad térmica | Approximately 0.10–0.25 W/(m·K) for the dry activated-carbon bed |
| Superficie acabada | Mill-galvanized steel, stainless steel or black moisture-resistant polymer frame |
| Tipo conjunto | Flat-panel gasket or slide-in header connection for standard holding frames |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Coconut-shell or coal-based activated carbonBonded pleat or loose-fill panelGalvanized, stainless or polymer frameImpregnated media for selected acidic or basic gases
Planning a Activated Carbon Panel Filter specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
