English
Португальский
Испанский язык
Японский
Индонезийский
Немецкий
Турецкий
Вьетнамский язык
Французский
Русский языкТекущий
Арабский язык
Тайский
Японский язык
Корейский
ESD и антистатические продукты
Tester ремешки запястья
The Wrist Strap Tester checks the resistance path through a worn ESD wrist strap and cord, then displays a high, pass or low result for routine personnel grounding verification.
- Three-state indication distinguishes high, acceptable and low resistance conditions.
- Large stainless touch plate supports a direct operator test routine.
- Compact sloped housing keeps the connection and result lamps easy to see.
Введение продукции
This compact tester combines a stainless contact plate, a dedicated wrist-cord jack and three vertically arranged result lamps on a sloped front panel. The molded charcoal enclosure can sit on a counter or be adapted for a fixed entry-point position. During a test, the operator connects the worn strap cord and touches the metal plate to complete the measurement path through the skin, band and cord. The separated high, pass and low indications help supervisors identify an open/high-resistance condition or an unexpectedly low-resistance path without interpreting a numerical display.
Основные характеристики
Brushed-stainless touch plate offers a durable operator contact surface.
Dedicated wrist-strap jack prevents confusion with footwear interfaces.
Sloped front panel improves visibility at counter height.
Compact molded enclosure supports portable or fixed-point use.
Side power connection keeps supply routing away from the touch surface.
Решения для вашего приложения
A wrist strap checker must be simple enough for repeated daily use while distinguishing both high-resistance failures and unsafe low-resistance paths.
An operator enters the protected area with an open cord or poor skin contact.The high-result channel identifies a resistance path above the selected acceptance window.
A missing or bypassed current-limiting resistor is overlooked.The low-result channel identifies an unexpectedly low measured path for follow-up inspection.
Personnel misread a complicated numerical display.Three separated lamps communicate high, pass and low outcomes directly.
Inconsistent hand pressure makes testing awkward.The large metal plate provides a generous, stable contact area for the fingertip or palm.
The tester is difficult to see or reach at an entry station.A sloped face and compact footprint suit counter-level or wall-adjacent installation.
Типичные приложения
ESD-protected area entry checkpoints.Electronics production shift-start verification.PCB assembly and repair departments.Static-sensitive laboratories and inspection rooms.Supervisor spot checks of wrist strap assemblies.
Технические параметры
The representative construction below describes a single-circuit touch tester. Pass limits, cord connector, power arrangement and mounting method should be selected to match the established ESD compliance-verification plan.
| Основной материал | Flame-retardant ABS enclosure with electronic resistance-comparison circuit and metal contacts |
|---|---|
| Толщина панели | 2.0–4.0 mm molded housing and front-panel thickness |
| эффективная ширина | 95–160 mm enclosure width |
| Максимальная длина | Up to 220 mm overall enclosure depth |
| Толщина линий стали | 1.0–1.5 mm brushed-stainless touch-plate thickness |
| Плотность ядра | 1030-1080 кг/м³ плотность смолы ABS |
| Теплопроводимость | 0,17-0,22 Вт/(м · К) |
| Поверхностная отделка | Textured charcoal housing with black sloped panel, silver contact plate and red/green indicator lenses |
| Объединенный тип | Single wrist-cord jack and stainless touch plate connected to a three-state resistance comparator |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Fixed or selectable upper resistance limit.Battery, regulated DC or regional adapter input.Banana, snap or application-specific wrist-cord jack.Visual indication with optional audible signal.Bench-top or wall-mount arrangement.Test-result relay or access-control output where required.
Planning a Wrist Strap Tester specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
