STjh DN250 automated split butterfly valve with a pneumatic actuator and blue air lines on white

STJH-SPLIT-BUTTERFLY-VALVE-DN250-AUTO

Split Butterfly Valve DN250 Automated

A large-bore pneumatic split butterfly valve for automated transfer between IBCs, blenders, tablet presses and high-throughput process lines.

DN250 large bore
Pneumatic automation
Multiple cleaning strategies

Запрос котировки Просмотреть продукты

Введение продукции

The DN250 model combines the largest retained bore with pneumatic docking and actuation. It is designed for fixed process lines where transfer throughput and automation take priority over portable handling, with cleaning arrangements configurable for wash-in-place, clean-in-place or component removal.

Основные характеристики

Automated docking sequence

Pneumatic movement supports repeatable connection and valve operation within an integrated control sequence.

Bulk transfer capacity

The DN250 flow path suits high-volume IBC and process-machine discharge duties.

Enhanced containment option

An extraction-assisted configuration is available where the standard containment class does not meet the process objective.

Технические параметры

Nominal Size	DN250
Actuation	Pneumatic automated assembly
Docking	Automated compatible half-valve connection
Standard Published Containment	1-10 µg/m³ under stated test conditions
Extraction Option	Published option below 1 µg/m³ under stated test conditions
Cleaning Methods	WIP, CIP or COP capable
Transfer Duty	High-throughput bulk powder
Typical Interfaces	IBC, blender or tablet-press line
Control Integration	Pneumatic sequence interfaced with process controls
Customization	Automation sequence, extraction, seals and cleaning architecture can be selected for the process line.

Applications

Automated contained transfer from IBCs to blenders, tablet presses, filling equipment and other fixed high-throughput powder processes.

Solutions for Your Application

Manual docking is too slow or inconsistent for a high-cycle transfer line.Use the pneumatic assembly to control docking and valve movement within the line sequence.

Cleaning access must fit the plant's established method.Choose a WIP, CIP or COP arrangement during valve and surrounding-equipment design.

Доступные варианты

Extraction-assisted containment, process-control interfaces, seal materials and WIP, CIP or COP cleaning packages can be configured.

Planning a Split Butterfly Valve DN250 Automated specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой