STJH-REINFORCED-WALK-ON-CLEANROOM-CEILING-PANEL-25-GASKETED

Reinforced Walk-On Cleanroom Ceiling Panel 25.4 mm Gasket-Supported Aluminum

Thin aluminum deck infill for gasketed ceiling supports.

The 25.4 mm section keeps the infill shallow.
Metallic skins provide a lightweight deck surface.
Flat perimeter rests on continuous grid seals.

Введение продукции

An epoxy bond joins aluminum cover sheets to a cellular aluminum center. The panel seats on the gasketed grid rather than carrying its own suspension fittings, leaving the unit removable for equipment access.

Основные характеристики

The 25.4 mm section keeps the infill shallow.
Metallic skins provide a lightweight deck surface.
Flat perimeter rests on continuous grid seals.

Технические параметры

Thickness	25.4 mm
Length	1209.675 mm
Width	600.075 mm
Nominal Module	610 x 1220 mm
Facing Alloy	3105 H25 aluminum
Core	Aluminum honeycomb
Cell Size	19.05 mm
Bond	100 percent solids epoxy
Support	Gasketed ceiling grid
Customization	Available for the intended ceiling opening and access requirement.

Applications

Removable equipment access infills
Gasketed cleanroom ceiling decks

Solutions for Your Application

An infill with attached suspension is difficult to lift out.

The flat panel rests directly on the supporting gasket.

The deck needs stiffness without a thick solid slab.

Cellular metal separates and supports the aluminum skins.

Доступные варианты

Mill-finish cover sheets
Alternative aluminum cover finish

Planning a Reinforced Walk-On Cleanroom Ceiling Panel 25.4 mm Gasket-Supported Aluminum specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой