STJH-LOW-VOLTAGE-DC-FFU-410X416-24V

Fan Filter Unit 410 × 416 mm 24 VDC Low-Voltage

A medium-format DC filter unit with five airflow settings for adjustable air delivery across an equipment loading area.

Five airflow settings
Replaceable HEPA element
Equipment loading area

Введение продукции

The 410 mm housing carries a replaceable HEPA element within a compact fan assembly. Its larger outlet bridges the gap between an individual instrument cover and a wider process enclosure, while the separate operating and airflow controls support routine adjustment. The nominal 416 mm depth corresponds to a 415.5 mm casing dimension.

Основные характеристики

Five discrete settings

Five discrete settings allow intermediate air delivery rather than an all-or-nothing increase.

Defined replacement size

A 350 x 350 x 50 mm filter format provides a defined replacement size for maintenance planning.

Removable intake prefilter

A removable intake prefilter catches larger airborne debris before it reaches the final filter.

Технические параметры

Casing Dimensions	410 W x 415.5 D x 150 H mm
Power Supply	24 VDC
Motor Type	Brushless DC motor
Airflow Settings	Five steps: approximately 3.4 / 3.0 / 2.5 / 2.0 / 1.0 m³/min
Nominal Discharge Velocity	Approximately 0.52 / 0.46 / 0.38 / 0.31 / 0.15 m/s, from highest to lowest setting
Power Consumption	Approximately 41 / 32 / 26 / 20 / 10 W in descending airflow order
Main Filter	HEPA, 350 x 350 x 50 mm; nominal collection efficiency at least 99.99% at 0.3 µm
Prefilter	Serviceable polymer mesh on the intake
Casing Material	Moulded antistatic ABS
Customization	The mounting interface and cable arrangement can be adapted to the loading station and its operating environment.

Applications

Filtered make-up air for a compact semiconductor equipment loading enclosure. Overhead supply to a covered parts buffer beside an assembly process.

Solutions for Your Application

The loading area needs more air during active transfer than while parts are waiting.Select an intermediate or higher fan position for the established operating condition, then use the lower position when the process permits.

Routine filter service could require dismantling the surrounding machine guard.Arrange accessible filter withdrawal space and keep the intake mesh reachable when positioning the housing.

Доступные варианты

ULPA filtration in place of the standard HEPA arrangement. A DC connection lead matched to the equipment power supply.

Planning a Fan Filter Unit 410 × 416 mm 24 VDC Low-Voltage specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой