STJH-LOW-RESISTANCE-HEPA-H14-KNIFE610

Low-Resistance HEPA Filter 610 mm Knife-Edge ePTFE

A low-resistance H14 membrane panel with an integral knife edge for common-plenum gel-grid ceilings.

Integral frame knife edge
Full-module H14 ePTFE
Common-plenum installation

Введение продукции

The knife-edge version places the rigid sealing blade on the approximately 610 mm filter frame, allowing it to enter gel held in the ceiling grid. Supported hydrophobic ePTFE media supplies H14 performance with lower average resistance and better handling strength than traditional fragile media. This configuration is chosen for open common plenums, not housings that expect gel on the filter itself.

Основные характеристики

Grid-held gel compatibility

The aluminum knife edge seats into a gel trough built into the ceiling support system.

Energy-conscious media pack

Low-resistance membrane construction helps limit recirculation-fan demand across large ceiling fields.

Clean installation profile

The rigid edge provides a defined insertion geometry without compressing a dry gasket.

Технические параметры

Nominal Face	About 610 x 610 mm
Classification	H14 / at least 99.995% at MPPS
Media	Hydrophobic supported ePTFE
Frame Construction	Anodized aluminum with integral knife edge
Seal Receiver	Gel channel in ceiling grid
Resistance Design	Low average pressure drop
Handling Property	High membrane tensile strength
Installation Environment	Open common plenum
Critical Fit Check	Knife-edge location and gel-trough centerline
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Applications

Specified for common-plenum life-science ceilings, mini-environment grids and large laminar-flow fields that retain gel in the support grid. It helps facilities combine an H14 membrane pack with low resistance while keeping the fluid seal outside the replaceable filter.

Solutions for Your Application

The gel-grid ceiling receives a filter with a flat gasket frame.Use the integral knife-edge model and match its blade centerline to the existing gel trough.

A full ceiling field develops high fan demand as final filters load.The ePTFE media is selected for a lower average resistance profile; track actual pressure drop for change planning.

Доступные варианты

Specify exact knife-edge offset, face dimensions, media-pack depth, airflow direction and protective screen for the common-plenum grid.

Planning a Low-Resistance HEPA Filter 610 mm Knife-Edge ePTFE specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой