English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Coated wear-body construction
The wearing layer is formed by a coating process rather than dense chip pressing. That manufacturing distinction remains meaningful even when the overall sheet thickness matches another model.
STJH-HYGIENIC-CLEANROOM-VINYL-SHEET-FLOORING-COATED-20
Hygienic Cleanroom Vinyl Sheet Flooring Coated-Inlaid Multilayer
An inlaid coated wear layer over fibre reinforcement and compact backing for hygienic room finishes.
- 1 mm coated inlaid wear layer
- Fibre-grid reinforced compact body
- Matte factory surface treatment
About This Product
The coated-inlaid configuration uses a 1 mm filler-free wearing layer within a 2 mm heterogeneous sheet. Its inlaid appearance belongs to the wearing material, while a fibre grid and compact backing form the support beneath it. The construction is selected for installations that need workable coving, welded joints and a matte surface in a thin floor assembly.
Основные характеристики
Workable wall transitions
The filler-free wear section supports cutting and forming around cove details, helping installers achieve a cleanable transition at room perimeters and fixed upstands.
Compact support for movement
A non-cushioned backing provides a firm floor under trolley routes. Adhesive coverage and a smooth substrate remain essential beneath the entire sheet, particularly near joints.
Технические параметры
| Product Structure | Coated inlaid heterogeneous PVC |
|---|---|
| Overall Thickness | 2 mm |
| Wear Layer Thickness | 1 mm |
| Wear Layer Composition | Filler-free PVC |
| Internal Reinforcement | Fibre grid |
| Backing | Compact PVC |
| Roll Dimensions | 2,000 x 20,000 mm |
| Surface | Factory matte treatment |
| Installation | Full glue-down with welded seams |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Applications
Suitable for clean laboratories and controlled industrial interiors using compact non-ESD sheet flooring. Plan the joins and coved edges around cleaning access, rather than selecting an inlaid pattern alone. The floor should be combined with compatible adhesives and seal details appropriate to the actual substrate and room cleaning routine.
Solutions for Your Application
Sheet material is difficult to form at closely spaced wall corners.
Use the workable inlaid construction with a planned cove layout and purpose-made corner detailing rather than forcing unsupported folds.
A firm floor still develops uneven joints after installation.
Correct substrate defects and achieve full adhesive contact before welding; reinforcement cannot compensate for gaps beneath the sheet.
Доступные варианты
Specify the inlaid finish, matte surface and coordinated welding material. Include the cove radius, door termination and junction to neighbouring floor types in the installation arrangement before cutting the rolls.
Planning a Hygienic Cleanroom Vinyl Sheet Flooring Coated-Inlaid Multilayer specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
