STJH-HEPA-GASKET-SEAMLESS-PU

HEPA Filter Compression Gasket Seamless Polyurethane

A jointless poured PU foam perimeter that removes corner splices from a clamped HEPA filter seal.

Jointless poured perimeter
Cellular polyurethane foam
Upstream or downstream placement

Введение продукции

This cellular polyurethane gasket is poured directly onto the filter frame as one continuous perimeter. Removing cut-and-joined corners eliminates common splice gaps and gives the housing clamps a consistent foam section to compress. The gasket can be located upstream, downstream or on both faces for standard cleanroom service, provided the housing travel is matched to its thickness and recovery characteristics.

Основные характеристики

No corner splices

Continuous molding removes four butt joints that can open under uneven clamp pressure.

Uniform compression section

A controlled foam bead supports consistent sealing around the complete filter frame.

Flexible face location

The gasket can be applied to either airflow face or both when the installation interface requires it.

Технические параметры

Gasket Material	Cellular polyurethane foam
Construction	Seamless poured-in-place perimeter
Location	Upstream, downstream or both faces
Seal Method	Housing clamp compression
Primary Compatibility	General HEPA and ULPA frames
Service Temperature	Standard cleanroom duty
Joint Count	No cut corner splices
Frame Preparation	Bonded to clean prepared surface
Inspection	Check compression recovery and surface continuity
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Applications

For pharmaceutical, healthcare and clean-process HEPA filters using conventional gasket-seal housings and terminal frames.

Solutions for Your Application

A cut gasket opens at the corner and creates a difficult-to-find bypass path.Use the seamless poured perimeter and inspect the complete bead before loading the filter.

Excess clamp travel permanently crushes the cellular foam.Set retainers for the specified gasket compression and do not substitute a different bead thickness without adjustment.

Доступные варианты

Specify bead width and height, face location, foam firmness, frame material, adhesive preparation and housing compression travel.

Planning a HEPA Filter Compression Gasket Seamless Polyurethane specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой