Deep equipment clearance
The three-metre depth accommodates skids and drum handling that project farther into the booth.
This 3400 x 3000 mm booth prioritizes process depth over the maximum width of the 4100 mm model. Its published airflow is approximately 11000 m³/h downflow with 1400 m³/h exhaust, using H14 final filters and rear-wall recirculation. The 3000 mm depth suits skids or large drums that need operator access around the front and sides.
The three-metre depth accommodates skids and drum handling that project farther into the booth.
Rear-wall return air passes through H14 filtration before re-entering the work zone.
The 1400 m³/h exhaust draws replacement air inward at low level to support containment.
| Front Size | 3400 W x 3000 D mm |
|---|---|
| Downflow Rate | Approximately 11000 m³/h |
| Exhaust Rate | Approximately 1400 m³/h |
| Nominal Velocity | 0.30 m/s |
| Velocity Range | 0.1-0.6 m/s |
| Final Filter | H14 HEPA |
| Prefilter | G3 or G4 |
| Airflow Pattern | Downflow with rear-wall recirculation |
| Typical Process | Deep drum or skid handling |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
For deep powder-handling layouts with large drums or process skids. Maintain clear low-level induction and rear-return paths around the installed equipment.
Select worktable, ventilated process surface, induction curtains or plates, and control monitoring. Width and depth can be customized to the skid.
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.