STjh extended 584 mm continuous liner system with a larger film reserve

STJH-CONTINUOUS-LINER-DISCHARGE-SYSTEM-584X30M

Continuous Liner Discharge System 584 mm × 30 m Extended

An extended 30.5 m continuous sleeve with a 584 mm diameter for high-change-count contained production campaigns.

30.5 m extended supply
584 mm receiving diameter
Fewer canister reloads

Введение продукции

This model retains the drum-scale 23-inch liner diameter but doubles the supplied film length of the medium campaign version. The larger stored reserve is suited to processes that fill many receivers in sequence and where stopping to reload the canister would interrupt an established containment and cleaning plan.

Основные характеристики

Long-campaign continuity

The extended roll supports more sealed receiver changes before personnel must install a replacement liner.

Broad powder collection

A 584 mm sleeve opens into a drum without concentrating free-flowing material at a small connection.

Selectable static control

An antistatic film option can be considered where the powder and process risk assessment calls for charge management.

Технические параметры

Nominal Liner Diameter	584 mm (23 in)
Supplied Length	30.5 m (100 ft)
Film Type	Multilayer pharmaceutical containment film
Static-Control Option	Antistatic film available
Typical Outlet Connection	203 or 305 mm (8 or 12 in) canister
Container Change Method	Sequential crimping, separation and film advancement
Receiver Format	Multiple production drums
Containment Reference	Application-dependent; comparable manufacturer systems report below 1 µg/m³
Campaign Profile	Extended run with frequent receiver changes
Customization	Film electrical properties, roll length, interface transition and closing tools can be selected for the material and operating environment.

Applications

Extended HPAPI or fine-powder campaigns beneath production mills, dryers or contained discharge stations with frequent drum exchanges.

Solutions for Your Application

Reloading liner film during an active campaign adds downtime and another controlled intervention.Load the 30.5 m sleeve when the batch plan calls for a high number of consecutive receiver changes.

A large stored roll may exceed the available space around a compact discharge point.Verify the canister capacity and surrounding service clearance before choosing the extended configuration.

Доступные варианты

Standard or antistatic containment film, special roll lengths, 203 or 305 mm canisters, reduced-outlet transitions, crimp systems and band clamps may be specified.

Planning a Continuous Liner Discharge System 584 mm × 30 m Extended specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой