Pembekal Satu Henti Anda untuk Peralatan Bilik Bersih dan Kemudahan AseptikSokongan Projek Antarabangsa
Open mobile navigationClose mobile navigation
Laman Utama / Produk / Containment & Biosafety Equipment / Continuous Liner Discharge System 584 mm × 30 m Extended
STJH-CONTINUOUS-LINER-DISCHARGE-SYSTEM-584X30M

Continuous Liner Discharge System 584 mm × 30 m Extended

An extended 30.5 m continuous sleeve with a 584 mm diameter for high-change-count contained production campaigns.
  • 30.5 m extended supply
  • 584 mm receiving diameter
  • Fewer canister reloads
Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This model retains the drum-scale 23-inch liner diameter but doubles the supplied film length of the medium campaign version. The larger stored reserve is suited to processes that fill many receivers in sequence and where stopping to reload the canister would interrupt an established containment and cleaning plan.

Ciri-ciri Utama

Long-campaign continuity

The extended roll supports more sealed receiver changes before personnel must install a replacement liner.

Broad powder collection

A 584 mm sleeve opens into a drum without concentrating free-flowing material at a small connection.

Selectable static control

An antistatic film option can be considered where the powder and process risk assessment calls for charge management.

Parameter teknikal

Nominal Liner Diameter584 mm (23 in)
Supplied Length30.5 m (100 ft)
Film TypeMultilayer pharmaceutical containment film
Static-Control OptionAntistatic film available
Typical Outlet Connection203 or 305 mm (8 or 12 in) canister
Container Change MethodSequential crimping, separation and film advancement
Receiver FormatMultiple production drums
Containment ReferenceApplication-dependent; comparable manufacturer systems report below 1 µg/m³
Campaign ProfileExtended run with frequent receiver changes
PenyesuaianFilm electrical properties, roll length, interface transition and closing tools can be selected for the material and operating environment.

Applications

Extended HPAPI or fine-powder campaigns beneath production mills, dryers or contained discharge stations with frequent drum exchanges.

Solutions for Your Application

Reloading liner film during an active campaign adds downtime and another controlled intervention.Load the 30.5 m sleeve when the batch plan calls for a high number of consecutive receiver changes.
A large stored roll may exceed the available space around a compact discharge point.Verify the canister capacity and surrounding service clearance before choosing the extended configuration.

Pilihan yang boleh didapati

Standard or antistatic containment film, special roll lengths, 203 or 305 mm canisters, reduced-outlet transitions, crimp systems and band clamps may be specified.

Planning a Continuous Liner Discharge System 584 mm × 30 m Extended specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami
Email Kami WhatsApp WeChat

Laman Utama

Produk

Berita

Tentang Kami

Hubungi Kami