STjh 600 mm Class I biosafety cabinet with a compact glass enclosure and analog pressure gauge on white

STJH-CLASS-I-BIOSAFETY-CABINET-600

Class I Biological Safety Cabinet 600 mm

A compact negative-pressure Class I cabinet for single-operator procedures that need personnel and environmental protection without product protection.

610 mm work width
Negative-pressure containment
HEPA-filtered exhaust

Запрос котировки Просмотреть продукты

Введение продукции

The 610 mm nominal work width gives one operator a contained bench space while occupying less laboratory frontage than the wider models. Room air enters through the front opening and leaves through HEPA filtration, so the enclosure is intended for processes where protecting the sample from incoming air is not required.

Основные характеристики

Compact operator station

The two-foot format concentrates containment around a small apparatus or a limited sample-handling task.

Personnel-focused airflow

Inward airflow at the open front helps keep process aerosols from moving into the room.

Flexible exhaust arrangement

The cabinet may operate as a recirculating enclosure or be connected through a suitable exhaust canopy.

Технические параметры

Nominal Work Width	610 mm
Cabinet Class	Class I
Inflow Velocity	0.38-0.53 m/s
Pressure Mode	Negative relative to the room
Exhaust Filter	HEPA, nominal 99.99% efficiency at 0.3 µm
Airflow Arrangement	Room inflow with filtered recirculation or canopy-connected exhaust
Product Protection	Not provided by the Class I airflow pattern
Front Access	Single operator opening
Typical Work Position	Compact one-person bench procedure
Customization	Exhaust connection and work-zone services can be configured for the intended procedure and room conditions.

Applications

Small microbiology preparations, aerosol-generating equipment enclosures and sample handling in BSL-1 to BSL-3 laboratories when product protection is not required.

Solutions for Your Application

A compact laboratory needs containment without allocating space for a full-width cabinet.Use the 610 mm work zone for one defined operation and keep unrelated equipment outside the enclosure.

The process may release aerosols toward the operator.Maintain the specified inward airflow and verify that the front opening remains unobstructed during use.

Доступные варианты

A recirculating exhaust arrangement, a canopy connection and work-zone service fittings may be selected to suit the laboratory layout.

Planning a Class I Biological Safety Cabinet 600 mm specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой