STjh 914 mm recirculating HEPA pass box with a large glazed chamber and compact upper blower housing

STJH-BIOSAFETY-PASS-BOX-RECIRC-914

Biosafety Pass Box 914 mm Recirculating HEPA

A large 914 mm cubic recirculating HEPA pass box for equipment cases and high-volume clean supply loads.

914 mm cubic volume
Large-case transfer
ISO 5 HEPA recirculation

Введение продукции

The 36-inch internal cube is the largest pass box in this group. It accepts bulky equipment cases and consolidated supply loads while retaining the closed-loop ISO 5 airflow principle of the smaller 457 and 610 mm models.

Основные характеристики

Large clear volume

Bulky containers can pass without being divided into several smaller loads.

Closed-loop filtration

HEPA recirculation cleans chamber air without a continuous facility exhaust connection.

Robust stainless shell

304 stainless construction supports frequent large-load handling.

Технические параметры

Internal Chamber	914 x 914 x 914 mm
Air Cleanliness	ISO 5 internal airflow
Final Filter	HEPA, nominal 99.99% at 0.3 µm
Airflow	Closed-loop recirculating
Construction	304 stainless steel
Door Arrangement	Two-sided pass-through
Load Scale	Large
Typical Loads	Equipment cases and consolidated supplies
Installation	Wall mounted with structural support
Customization	Door support, shelf or roller deck and wall frame can be configured for the load weight.

Applications

Large cleanroom equipment cases, bulk sterile supplies and oversized carriers transferred across controlled boundaries.

Solutions for Your Application

Oversized cases cannot clear a 610 mm chamber.Use the 914 mm cube and confirm door, wall and turning clearances.

Heavy loads are difficult to slide across a flat floor.Configure an appropriate shelf or roller surface and structural wall support.

Доступные варианты

Roller deck, reinforced support, door interlock and mounting trim can be selected.

Planning a Biosafety Pass Box 914 mm Recirculating HEPA specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой