STjh wide 6 foot aseptic laminar workstation with two-section HEPA housing and dual-position work area

STJH-ASEPTIC-LAMINAR-WORKSTATION-6FT

Aseptic Laminar Flow Workstation 6 ft

The largest sterility-module width for broad non-hazardous pharmaceutical preparation and grouped syringe work.

70 in large cabinet width
1080 CFM at 90 fpm
67.5 in critical work dimension

Введение продукции

This six-foot model extends the A dimension to 70 in and the E working dimension to 67.5 in. Average airflow rises to 1080 CFM at 90 fpm to serve the wider stainless work zone, with a published heat load of 1600 BTU/h. It suits broad preparation layouts but requires more electrical, cooling and structural capacity than the smaller modules.

Основные характеристики

Broad aseptic workspace

The six-foot interior accommodates grouped syringe work, long trays or multiple instruments.

Higher airflow capacity

The 1080 CFM average flow supports the extended HEPA-filtered working width.

Defined utility planning

Published electrical, heat and weight data support planning for the larger module.

Технические параметры

Published Dimensions A/B/C	70 x 24.25 x 28 in
Published Dimension E	67.5 in
Average Airflow	1080 CFM at 90 fpm
Final Filter	HEPA, 99.99% at 0.3 µm
Work-Zone Condition	ISO Class 5
Electrical Supply	115 V, 60 Hz, 10.0 A
Heat Load	1600 BTU/h
Shipping Weight	510 lb
Construction	Welded steel with stainless work area
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Applications

For large sterile-component preparation, grouped syringe processes and broad non-hazardous pharmaceutical assembly. Confirm bench support, cooling load and operator zoning before installation.

Solutions for Your Application

Long trays or grouped preparations extend beyond a four-foot work zone.Use the 67.5 in working dimension to keep the complete critical process beneath filtered airflow.

The larger module adds significant weight and heat to the room.Plan support for the 510 lb shipping weight and include the 1600 BTU/h heat load in HVAC calculations.

Доступные варианты

Configure support base, task lighting, utility connections and work-surface accessories. Workflow dividers should be selected only when they do not disrupt the airflow pattern.

Planning a Aseptic Laminar Flow Workstation 6 ft specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой